Specification	HMC641ATCPZ-EP-RL7

Circuit	SP4T
Frequency Range [Max]	20 GHz
Frequency Range [Min]	100 MHz
Impedance	50 Ohms
Insertion Loss	3 dB
Isolation	40 dB
Mounting Type	Surface Mount
Operating Temperature [Max]	125 °C
Operating Temperature [Min]	-55 C
P1dB	24 dBm
Package / Case	24-VFQFN Exposed Pad, CSP
RF Type	General Purpose
Supplier Device Package	24-LFCSP (4x4)
Test Frequency	20 GHz
Topology	Absorptive

HMC641 Series

HMC641 / HMC641LC4 / HMC641LP4E SP4T

Part	Mounting Type	RF Type	Package / Case	P1dB	Frequency Range [Min]	Frequency Range [Max]	Insertion Loss	Circuit	Impedance	Test Frequency	Isolation	Operating Temperature [Min]	Operating Temperature [Max]	Topology	Supplier Device Package	IIP3	Supplied Contents	For Use With/Related Products	Frequency [Max]	Frequency [Min]	Type	Utilized IC / Part	Contents
Analog Devices Inc./Maxim Integrated HMC641ATCPZ-EP-RL7	Surface Mount	General Purpose	24-VFQFN Exposed Pad CSP	24 dBm	100 MHz	20 GHz	3 dB	SP4T	50 Ohms	20 GHz	40 dB	-55 C	125 °C	Absorptive	24-LFCSP (4x4)
Analog Devices Inc./Maxim Integrated HMC641LP4E	Surface Mount	General Purpose	24-VFQFN Exposed Pad	22 dBm	0 Hz	20 GHz	3 dB	SP4T	50 Ohms	20 GHz	40 dB	-40 C	85 °C	Absorptive	24-QFN (4x4)	38 dBm
Analog Devices Inc./Maxim Integrated HMC641LP4ETR	Surface Mount	General Purpose	24-VFQFN Exposed Pad	22 dBm	0 Hz	20 GHz	3 dB	SP4T	50 Ohms	20 GHz	40 dB	-40 C	85 °C	Absorptive	24-QFN (4x4)	38 dBm
Analog Devices Inc./Maxim Integrated HMC641LC4TR	Surface Mount	General Purpose	24-TFQFN Exposed Pad	22 dBm	0 Hz	20 GHz	2.3 dB	SP4T	50 Ohms	20 GHz	40 dB	-40 C	85 °C	Absorptive	24-QFN (4x4)	38 dBm
Analog Devices Inc./Maxim Integrated EV1HMC641ALP4																	Board(s)	HMC641ALP4E	20 GHz	0 Hz	Switch SP4T	HMC641ALP4E	Board(s)
Analog Devices Inc./Maxim Integrated HMC641		VSAT	Die	24 dBm	0 Hz	18 GHz	1.8 dB	SP4T	50 Ohms	18 GHz	40 dB	-55 C	85 °C	Absorptive	Die	40 dBm
Analog Devices Inc./Maxim Integrated HMC641LC4	Surface Mount	General Purpose	24-TFQFN Exposed Pad	22 dBm	0 Hz	20 GHz	2.3 dB	SP4T	50 Ohms	20 GHz	40 dB	-40 C	85 °C	Absorptive	24-QFN (4x4)	38 dBm
Analog Devices Inc./Maxim Integrated HMC641A		General Purpose	Die	25 dBm	100 MHz	18 GHz	2.3 dB	SP4T	50 Ohms	18 GHz	38 dB	-40 C	85 °C	Absorptive	Die
Analog Devices Inc./Maxim Integrated HMC641LC4TR-R5	Surface Mount	General Purpose	24-TFQFN Exposed Pad	22 dBm	0 Hz	20 GHz	2.3 dB	SP4T	50 Ohms	20 GHz	40 dB	-40 C	85 °C	Absorptive	24-QFN (4x4)	38 dBm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$	Updated

Digikey	Tape & Reel (TR)	500	$ 132.93	<3d

Description

General part information

HMC641 Series

The HMC641A is a nonreflective, single-pole, four-throw (SP4T) switch, manufactured using a gallium arsenide (GaAs) process. This switch typically provides low insertion loss of 2.1 dB and high isolation of 42 dB in broadband frequency range from 0.1 GHz to 18 GHz.The HMC641A includes an on-chip, binary 2 to 4 line decoder that provides control from two logic input lines.The switch operates with a negative supply voltage of −5 V to −3 V and requires two negative logic control voltages.All electrical performance data is acquired with the HMC641A that all RFx pads are connected to by the 50 Ω transmission lines via one 3.0 mil × 0.5 mil ribbon bond of minimal length.ApplicationsTest instrumentationMicrowave radios and very small aperture terminals (VSATs)Military radios, radars, and electronic counter measures (ECMs)Broadband telecommunications systems

Documents

Technical documentation and resources

Tape and Reel Packaging

HMC641ATCPZ-EP-RL7 | Datasheet

Datasheet

Package Drawing - 24-Lead LFCSP (4mm x 4mm x 0.85mm w/ EP)

Package Drawing

HMC641ALP4E: 0.1 GHz to 20 GHz GaAs, Nonreflective, SP4T Switch Data Sheet (Rev.B)

Data Sheet