Zenode.ai Logo
Beta
Texas Instruments-LM2575S-12 DC to DC Converter and Switching Regulator Chip Conv DC-DC 4V to 40V Step Down Single-Out 12V 1A 6-Pin(5+Tab) DDPAK Tube
Integrated Circuits (ICs)

TPS75925KTTR

Obsolete
Texas Instruments

LDO REGULATOR POS 2.5V 7.5A 6-PIN(5+TAB) DDPAK T/R

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet
Texas Instruments-LM2575S-12 DC to DC Converter and Switching Regulator Chip Conv DC-DC 4V to 40V Step Down Single-Out 12V 1A 6-Pin(5+Tab) DDPAK Tube
Integrated Circuits (ICs)

TPS75925KTTR

Obsolete
Texas Instruments

LDO REGULATOR POS 2.5V 7.5A 6-PIN(5+TAB) DDPAK T/R

Deep-Dive with AI

DocumentsDatasheet

Technical Specifications

Parameters and characteristics for this part

SpecificationTPS75925KTTR
Control FeaturesEnable, Power Good
Current - Output7.5 A
Current - Quiescent (Iq)200 µA
Mounting TypeSurface Mount
Number of Regulators1
Operating Temperature [Max]125 °C
Operating Temperature [Min]-40 °C
Output ConfigurationPositive
Output Type1.81 mOhm
Package / CaseTO-263-6, TO-263BA, D2PAK (5 Leads + Tab)
Protection FeaturesOver Temperature, Over Current, Under Voltage Lockout (UVLO), Reverse Polarity
PSRR58 dB
Supplier Device PackageTO-263 (DDPAK-5)
Voltage - Input (Max) [Max]5.5 V
Voltage - Output (Min/Fixed)2.5 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$

Description

General part information

TPS75915 Series

The TPS759xx family of 7.5-A low dropout (LDO) regulators contains four fixed voltage option regulators with integrated power-good (PG)\ and an adjustable voltage option regulator. These devices are capable of supplying 7.5 A of output current with a dropout of 400 mV (TPS75933). Therefore, the devices are capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 uA at full load and drops below 10 µA when the devices are disabled. The TPS759xx is designed to have fast transient response for large load current changes.

Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 400 mV at an output current of 7.5 A for the TPS75933) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 125 µA over the full range of output current, 1 mA to 7.5 A). These two key specifications yield a significant improvement in operating life for battery-powered systems.

The device is enabled when EN\ is connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal to EN\ (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at TJ= 25°C. The power-good terminal (PG)\ is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator.

Documents

Technical documentation and resources