BQ25100YFPR
ActiveSTANDALONE 1-CELL, 250-MA LINEAR BATTERY CHARGER WITH 4.2-V CHARGE VOLTAGE AND PROG. PRE-CHARGE
Deep-Dive with AI
Search across all available documentation for this part.
BQ25100YFPR
ActiveSTANDALONE 1-CELL, 250-MA LINEAR BATTERY CHARGER WITH 4.2-V CHARGE VOLTAGE AND PROG. PRE-CHARGE
Technical Specifications
Parameters and characteristics for this part
| Specification | BQ25100YFPR |
|---|---|
| Battery Chemistry | Lithium Ion/Polymer |
| Battery Pack Voltage | 4.2 V |
| Charge Current - Max [Max] | 250 mA |
| Current - Charging | Constant - Programmable |
| Fault Protection | Over Temperature, Short Circuit, Over Voltage |
| Mounting Type | Surface Mount |
| Number of Cells | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 6-XFBGA, DSBGA |
| Programmable Features | Current |
| Supplier Device Package | 6-DSBGA |
| Voltage - Supply (Max) [Max] | 6.45 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.75 | |
| 10 | $ 1.57 | |||
| 25 | $ 1.48 | |||
| 100 | $ 1.26 | |||
| 250 | $ 1.19 | |||
| 500 | $ 1.04 | |||
| 1000 | $ 0.86 | |||
| Digi-Reel® | 1 | $ 1.75 | ||
| 10 | $ 1.57 | |||
| 25 | $ 1.48 | |||
| 100 | $ 1.26 | |||
| 250 | $ 1.19 | |||
| 500 | $ 1.04 | |||
| 1000 | $ 0.86 | |||
| Tape & Reel (TR) | 3000 | $ 0.80 | ||
| 6000 | $ 0.77 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.32 | |
| 100 | $ 1.09 | |||
| 250 | $ 0.78 | |||
| 1000 | $ 0.59 | |||
Description
General part information
BQ25100A Series
The bq25100B device is a highly integrated Li-Ion and Li-Pol linear charger targeted at space-limited portable applications. The high input voltage range with input overvoltage protection supports low-cost unregulated adapters.
The bq25100B has a single power output that charges the battery. A system load can be placed in parallel with the battery as long as the average system load does not keep the battery from charging fully during the 10 hour safety timer.
The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an internal temperature threshold is exceeded.
Documents
Technical documentation and resources
