ISL95810WIU8-T
ObsoleteIC DGTL POT 10KOHM 256TAP 8MSOP
Deep-Dive with AI
Search across all available documentation for this part.
ISL95810WIU8-T
ObsoleteIC DGTL POT 10KOHM 256TAP 8MSOP
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | ISL95810WIU8-T |
|---|---|
| Configuration | Potentiometer |
| Interface | I2C |
| Memory Type | Non-Volatile |
| Mounting Type | Surface Mount |
| Number of Circuits | 1 |
| Number of Taps | 256 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-MSOP, 8-TSSOP |
| Package / Case | 3 mm |
| Package / Case [custom] | 0.118 in |
| Resistance - Wiper (Ohms) (Typ) | 70 Ohms |
| Resistance (Ohms) | 10k |
| Supplier Device Package | 8-MSOP |
| Taper | Linear |
| Temperature Coefficient (Typ) | 45 ppm/°C |
| Tolerance | 20 % |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 2.7 V |
ISL95810 Series
Single Digitally Controlled Potentiometer (XDCP™)
| Part | Resistance (Ohms) | Configuration | Resistance - Wiper (Ohms) (Typ) | Number of Circuits | Number of Taps | Package / Case | Package / Case [custom] | Package / Case | Tolerance | Voltage - Supply [Min] | Voltage - Supply [Max] | Operating Temperature [Max] | Operating Temperature [Min] | Mounting Type | Temperature Coefficient (Typ) | Memory Type | Supplier Device Package | Taper | Interface | Resistance (Ohms) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Renesas Electronics Corporation | 10k | Potentiometer | 70 Ohms | 1 | 256 | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | 20 % | 2.7 V | 5.5 V | 85 °C | -40 °C | Surface Mount | 45 ppm/°C | Non-Volatile | 8-MSOP | Linear | I2C | |
Renesas Electronics Corporation | 10k | Potentiometer | 70 Ohms | 1 | 256 | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | 20 % | 2.7 V | 5.5 V | 85 °C | -40 °C | Surface Mount | 45 ppm/°C | Non-Volatile | 8-MSOP | Linear | I2C | |
 Renesas Electronics Corporation | Potentiometer | 70 Ohms | 1 | 256 | 8-WDFN Exposed Pad | 20 % | 2.7 V | 5.5 V | 85 °C | -40 °C | Surface Mount | 45 ppm/°C | Non-Volatile | 8-TDFN (3x3) | Linear | I2C | 50 kOhms | |||
Renesas Electronics Corporation | Potentiometer | 70 Ohms | 1 | 256 | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | 20 % | 2.7 V | 5.5 V | 85 °C | -40 °C | Surface Mount | 45 ppm/°C | Non-Volatile | 8-MSOP | Linear | I2C | 50 kOhms | |
Renesas Electronics Corporation | 10k | Potentiometer | 70 Ohms | 1 | 256 | 8-WDFN Exposed Pad | 20 % | 2.7 V | 5.5 V | 85 °C | -40 °C | Surface Mount | 45 ppm/°C | Non-Volatile | 8-TDFN (3x3) | Linear | I2C |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
Description
General part information
ISL95810 Series
The ISL95810 integrates a digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit. The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wiper is controlled by the user through the I2C bus interface. The potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR), that can be directly written to and read by the user. The content of the WR controls the position of the wiper. At power-up the device recalls the contents of the DCP's IVR to the WR. The DCP can be used as three-terminal potentiometer or as two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.
Documents
Technical documentation and resources
No documents available