LM20145MHX/NOPB
ActiveCONV DC-DC 2.95V TO 5.5V SYNCHRONOUS STEP DOWN SINGLE-OUT 0.8V TO 5V 5A 16-PIN HTSSOP EP T/R
Deep-Dive with AI
Search across all available documentation for this part.
LM20145MHX/NOPB
ActiveCONV DC-DC 2.95V TO 5.5V SYNCHRONOUS STEP DOWN SINGLE-OUT 0.8V TO 5V 5A 16-PIN HTSSOP EP T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LM20145MHX/NOPB |
|---|---|
| Current - Output | 5 A |
| Frequency - Switching [Max] | 750 kHz |
| Frequency - Switching [Min] | 260 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | 16-PowerTSSOP |
| Package / Case | 0.173 in, 4.4 mm Width |
| Supplier Device Package | 16-HTSSOP |
| Synchronous Rectifier | True |
| Topology | Buck |
| Voltage - Input (Max) [Max] | 5.5 V |
| Voltage - Input (Min) [Min] | 2.95 V |
| Voltage - Output (Max) [Max] | 4.68 V |
| Voltage - Output (Min/Fixed) | 0.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 2500 | $ 1.56 | |
| 5000 | $ 1.50 | |||
| Texas Instruments | LARGE T&R | 1 | $ 2.35 | |
| 100 | $ 2.06 | |||
| 250 | $ 1.44 | |||
| 1000 | $ 1.16 | |||
Description
General part information
LM20145-Q1 Series
The LM20145 is a full featured adjustable frequency synchronous buck regulator capable of delivering up to 5A of continuous output current. The current mode control loop can be compensated to be stable with virtually any type of output capacitor. For most cases, compensating the device only requires two external components, providing maximum flexibility and ease of use. The device is optimized to work over the input voltage range of 2.95V to 5.5V making it suited for a wide variety of low voltage systems.
The device features internal over voltage protection (OVP) and over current protection (OCP) circuits for increased system reliability. A precision enable pin and integrated UVLO allows the turn-on of the device to be tightly controlled and sequenced. Start-up inrush currents are limited by both an internally fixed and externally adjustable Soft-Start circuit. Fault detection and supply sequencing is possible with the integrated power good circuit.
The LM20145 is designed to work well in multi-rail power supply architectures. The output voltage of the device can be configured to track a higher voltage rail using the SS/TRK pin. If the output of the LM20145 is pre-biased at startup it will not sink current to pull the output low until the internal soft-start ramp exceeds the voltage at the feedback pin.
Documents
Technical documentation and resources
