Specification	CAT5113YI-00-GT3

Configuration	Potentiometer
Interface	Up/Down
Memory Type	Non-Volatile
Mounting Type	Surface Mount
Number of Circuits	1
Number of Taps	100
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	8-TSSOP
Package / Case [custom]	0.173 "
Package / Case [custom]	4.4 mm
Resistance - Wiper (Ohms) (Typ) [Max]	1000 Ohms
Resistance (Ohms)	100 kOhms
Supplier Device Package	8-TSSOP
Taper	Linear
Temperature Coefficient (Typ)	300 ppm/°C
Tolerance	20 %
Voltage - Supply [Max]	6 V
Voltage - Supply [Min]	2.5 V

CAT5113 Series

Digital Potentiometer (POT), 100-Tap

Part	Number of Circuits	Tolerance	Configuration	Supplier Device Package	Mounting Type	Memory Type	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply [Min]	Voltage - Supply [Max]	Resistance (Ohms)	Number of Taps	Package / Case	Package / Case [custom]	Package / Case [custom]	Taper	Temperature Coefficient (Typ)	Interface	Resistance - Wiper (Ohms) (Typ) [Max]	Resistance (Ohms)	Package / Case	Package / Case	Package / Case [y]	Package / Case [x]
ON Semiconductor CAT5113YI-10-GT3	1	20 %	Potentiometer	8-TSSOP	Surface Mount	Non-Volatile	85 °C	-40 °C	2.5 V	6 V	10k	100	8-TSSOP	0.173 "	4.4 mm	Linear	300 ppm/°C	Up/Down	1000 Ohms
ON Semiconductor CAT5113YI-00-GT3	1	20 %	Potentiometer	8-TSSOP	Surface Mount	Non-Volatile	85 °C	-40 °C	2.5 V	6 V		100	8-TSSOP	0.173 "	4.4 mm	Linear	300 ppm/°C	Up/Down	1000 Ohms	100 kOhms
ON Semiconductor CAT5113ZI00	1			8-MSOP	Surface Mount	Non-Volatile	85 °C	-40 °C	2.5 V	6 V		100	8-MSOP 8-TSSOP	0.118 in		Linear	300 ppm/°C			100 kOhms	3 mm
ON Semiconductor CAT5113LI-10-G	1	20 %	Potentiometer	8-PDIP	Through Hole	Non-Volatile	85 °C	-40 °C	2.5 V	6 V	10k	100	8-DIP			Linear	300 ppm/°C	Up/Down	1000 Ohms		0.3 in	7.62 mm
ON Semiconductor CAT5113LI-50-G	1	20 %	Potentiometer	8-PDIP	Through Hole	Non-Volatile	85 °C	-40 °C	2.5 V	6 V		100	8-DIP			Linear	300 ppm/°C	Up/Down	1000 Ohms	50 kOhms	0.3 in	7.62 mm
ON Semiconductor CAT5113ZI-50-T3	1	20 %	Potentiometer	8-MSOP	Surface Mount	Non-Volatile	85 °C	-40 °C	2.5 V	6 V		100	8-MSOP 8-TSSOP	0.118 in		Linear	300 ppm/°C	Up/Down	1000 Ohms	50 kOhms	3 mm
ON Semiconductor CAT5113ZI50	1			8-MSOP	Surface Mount	Non-Volatile	85 °C	-40 °C	2.5 V	6 V		100	8-MSOP 8-TSSOP	0.118 in		Linear	300 ppm/°C			50 kOhms	3 mm
ON Semiconductor CAT5113VI-10-T3	1	20 %	Potentiometer	8-SOIC	Surface Mount	Non-Volatile	85 °C	-40 °C	2.5 V	6 V	10k	100	8-SOIC			Linear	300 ppm/°C	Up/Down	1000 Ohms				3.9 mm	0.154 in
ON Semiconductor CAT5113YI-01-GT3	1	20 %	Potentiometer	8-TSSOP	Surface Mount	Non-Volatile	85 °C	-40 °C	2.5 V	6 V		100	8-TSSOP	0.173 "	4.4 mm	Linear	300 ppm/°C	Up/Down	1000 Ohms	1 kOhms
ON Semiconductor CAT5113VI-00-GT3	1	20 %	Potentiometer	8-SOIC	Surface Mount	Non-Volatile	85 °C	-40 °C	2.5 V	6 V		100	8-SOIC			Linear	300 ppm/°C	Up/Down	1000 Ohms	100 kOhms			3.9 mm	0.154 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Bulk	140	$ 2.15

Description

General part information

CAT5113 Series

The CAT5113 is a single digital POT designed as an electronic replacement for mechanical potentiometers. Ideal for automated adjustments on high volume production lines, they are also well suited for applications where equipment requiring periodic adjustment is either difficult to access or located in a hazardous or remote environment.The CAT5113 contains a 100-tap series resistor array connected between two terminals RHand RL. An up/down counter and decoder that are controlled by three input pins, determines which tap is connected to the wiper, RW. The CAT5113 wiper is buffered by an op amp that operates rail to rail. The wiper setting, stored in non-volatile NVRAM memory, is not lost when the device is powered down and is automatically recalled when power is returned. The wiper can be adjusted to test new system values without affecting the stored setting. Wiper-control of the CAT5113 is accomplished with three input control pins,CS, U/D, andINC. TheINCinput increments the wiper in the direction which is determined by the logic state of the U/Dinput. TheCSinput is used to select the device and also store the wiper position prior to power down.The digital POT can be used as a three-terminal resistive divider or as a two-terminal variable resistor.