Integrated Circuits (ICs)

ISL6115CBZA-T

Active

Renesas Electronics Corporation

POWER DISTRIBUTION CONTROLLERS

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet

Integrated Circuits (ICs)

ISL6115CBZA-T

Active

Renesas Electronics Corporation

POWER DISTRIBUTION CONTROLLERS

Deep-Dive with AI

DocumentsDatasheet

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	ISL6115CBZA-T

Applications	General Purpose
Current - Supply	3 mA
Features	Latched Fault
Internal Switch(s)	False
Mounting Type	Surface Mount
Number of Channels	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	0 °C
Package / Case	8-SOIC
Package / Case [x]	0.154 in
Package / Case [y]	3.9 mm
Programmable Features	Fault Timeout, Current Limit
Supplier Device Package	8-SOIC
Type	Hot Swap Controller
Voltage - Supply [Max]	13.8 V
Voltage - Supply [Min]	10.2 V

ISL6115A Series

12V Power Distribution Controllers

Part	Package / Case	Package / Case [y]	Package / Case [x]	Current - Supply	Mounting Type	Features	Programmable Features	Voltage - Supply [Min]	Voltage - Supply [Max]	Applications	Supplier Device Package	Number of Channels	Internal Switch(s)	Type	Operating Temperature [Max]
Renesas Electronics Corporation ISL6115CBZA-TS2705	8-SOIC	3.9 mm	0.154 in	3 mA	Surface Mount	Fault Timeout Latched Fault UVLO	Current Limit Fault Timeout Latched Fault UVLO	10.2 V	13.8 V	General Purpose	8-SOIC	1	Both	Hot Swap Controller	85 C
Renesas Electronics Corporation ISL6115CBZA	8-SOIC	3.9 mm	0.154 in	3 mA	Surface Mount	Latched Fault	Current Limit Fault Timeout	10.2 V	13.8 V	General Purpose	8-SOIC	1		Hot Swap Controller	85 °C
Renesas Electronics Corporation ISL6115CBZA-T	8-SOIC	3.9 mm	0.154 in	3 mA	Surface Mount	Latched Fault	Current Limit Fault Timeout	10.2 V	13.8 V	General Purpose	8-SOIC	1		Hot Swap Controller	85 °C
Renesas Electronics Corporation ISL6115ACBZ-T	8-SOIC	3.9 mm	0.154 in	3 mA	Surface Mount	Latched Fault	Current Limit Fault Timeout	10.2 V	13.8 V	General Purpose	8-SOIC	1		Hot Swap Controller	70 °C

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tape & Reel (TR)	5000	$ 2.43

Description

General part information

ISL6115A Series

This fully featured hot swap power controller targets +12V applications. The ISL6115A with its integrated charge pump has a higher (6. 5V vs 5V) gate drive than its sister part the ISL6115 making this part an immediate efficiency improvement replacement. This IC features programmable overcurrent (OC) detection, current regulation (CR) with time delay to latch-off and soft-start. The current regulation level is set by 2 external resistors; RISETsets the CR Vth and the other is a low ohmic sense resistor across, which the CR Vth is developed. The CR duration is set by an external capacitor on the CTIM pin, which is charged with a 20µA current once the CR Vth level is reached. The IC then quickly pulls down the GATE output latching off the pass FET.

Documents

Technical documentation and resources