Zenode.ai Logo
AD7606C-16BSTZ-RL
Integrated Circuits (ICs)

AD7606C-16BSTZ-RL

Active
Analog Devices Inc./Maxim Integrated

8-CHANNEL DAS WITH 16-BIT, 1 MSPS BIPOLAR INPUT, SIMULTANEOUS SAMPLING ADC

AD7606C-16BSTZ-RL
Integrated Circuits (ICs)

AD7606C-16BSTZ-RL

Active
Analog Devices Inc./Maxim Integrated

8-CHANNEL DAS WITH 16-BIT, 1 MSPS BIPOLAR INPUT, SIMULTANEOUS SAMPLING ADC

Technical Specifications

Parameters and characteristics for this part

SpecificationAD7606C-16BSTZ-RL
ArchitectureSAR
ConfigurationPGA-ADC
Data InterfaceSPI, Parallel, Serial
FeaturesTrue Bipolar, PGA, Simultaneous Sampling, Temperature Sensor
Input TypeSingle Ended, Differential
Mounting TypeSurface Mount
Number of A/D Converters8 count
Number of Bits16 bits
Number of Inputs8
Operating Temperature (Max)125 °C
Operating Temperature (Min)-40 °C
Package / Case64-LQFP
Package Length10 mm
Package Name64-LQFP
Package Width10 mm
Ratio - ADC1
Ratio - S/H0
Reference TypeExternal, Internal
Sampling Rate (Per Second)1 MHz
Voltage - Supply, Analog (Max)5.25 V
Voltage - Supply, Analog (Min)4.75 V
Voltage - Supply, Digital (Max)5.25 V
Voltage - Supply, Digital (Min)1.71 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$Updated
DigikeyTape & Reel (TR) 1500$ 41.12<1d

CAD

3D models and CAD resources for this part

Description

General part information

AD7606C-16 Series

The AD7606C-16 is a 16-bit, simultaneous sampling, analog-to-digital data acquisition system (DAS) with eight channels. Each channel contains analog input clamp protection, a programmable gain amplifier (PGA), a low-pass filter (LPF), and a 16-bit successive approximation register (SAR) analog-to-digital converter (ADC). The AD7606C-16 also contains a flexible digital filter, a low drift, 2.5 V precision reference, a reference buffer to drive the ADC, and flexible parallel and serial interfaces. The AD7606C-16 operates from a single 5 V supply and accommodates the following input ranges when sampling at throughput rates of 1 MSPS for all channels:Bipolar single-ended: ±12.5 V, ±10 V, ±6.25 V, ±5 V, and±2.5 VUnipolar single-ended: 0 V to 12.5 V, 0 V to 10 V, and 0 V to 5 VBipolar differential: ±20 V, ±12.5 V, ±10 V, and ±5 VThe input clamp protection tolerates voltages up to ±21 V. The single supply operation, on-chip filtering, and high input impedance eliminate the need for external driver op amps, which require bipolar supplies. For applications with lower throughput rates, the AD7606C-16 flexible digital filter can be used to improve noise performance. In hardware mode, the AD7606C-16 is fully compatible with the AD7606 and AD7606B. In software mode, the following advanced features are available:Analog input range selectable per channel with added ranges availableHigh bandwidth mode (220 kHz) selectable per channelAdditional oversampling options with an oversampling ratio up to 256System gain, system offset, and system phase calibration, per channelAnalog input open circuit detectorDiagnostic multiplexerMonitoring functions (serial peripheral interface (SPI) invalid read and write, cyclic redundancy check (CRC), busy stuck monitor, and reset detection)Note that throughout this data sheet, multifunction pins, such as theRD/SCLK pin, are referred to either by the entire pin name or by a single function of the pin, for example, the SCLK pin, when only that function is relevant.APPLICATIONSPower line monitoringProtective relaysMultiphase motor controlInstrumentation and control systemsData acquisition systems