CY7C65213-32LTXIT
ActiveINTERFACE BRIDGES, USB TO UART, 3.15 V, 5.25 V, QFN, 32 PINS, -40 °C
Deep-Dive with AI
Search across all available documentation for this part.
CY7C65213-32LTXIT
ActiveINTERFACE BRIDGES, USB TO UART, 3.15 V, 5.25 V, QFN, 32 PINS, -40 °C
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | CY7C65213-32LTXIT |
|---|---|
| Function | Bridge, USB to UART |
| Interface | UART |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 C |
| Package / Case | 32-VFQFN Exposed Pad |
| Protocol | USB |
| Standards | USB 2.0 |
| Supplier Device Package | 32-QFN (5x5) |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 1.71 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.10 | |
| 10 | $ 2.79 | |||
| 25 | $ 2.64 | |||
| 100 | $ 2.28 | |||
| 250 | $ 2.17 | |||
| 500 | $ 1.94 | |||
| 1000 | $ 1.64 | |||
| Digi-Reel® | 1 | $ 3.10 | ||
| 10 | $ 2.79 | |||
| 25 | $ 2.64 | |||
| 100 | $ 2.28 | |||
| 250 | $ 2.17 | |||
| 500 | $ 1.94 | |||
| 1000 | $ 1.64 | |||
| N/A | 3867 | $ 3.00 | ||
| Tape & Reel (TR) | 2500 | $ 1.56 | ||
| 5000 | $ 1.50 | |||
| Mouser | N/A | 1 | $ 3.00 | |
| 10 | $ 2.25 | |||
| 25 | $ 2.06 | |||
| 100 | $ 1.86 | |||
| 250 | $ 1.76 | |||
| 500 | $ 1.70 | |||
| 1000 | $ 1.65 | |||
| 2500 | $ 1.59 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 3.12 | |
| 10 | $ 2.14 | |||
| 25 | $ 2.07 | |||
| 50 | $ 2.00 | |||
| 100 | $ 1.92 | |||
| 250 | $ 1.83 | |||
| 500 | $ 1.77 | |||
| 1000 | $ 1.71 | |||
Description
General part information
CY7C65213 Series
CY7C65213-32LTXIT is a USB-UART LP bridge controller. It provides a simple method to upgrade UART-based device to USB with a minimal number of components. It includes a USB 2.0 full-speed controller, a UART transceiver, an internal regulator, an internal oscillator. The internal flash is used to store custom-specific USB descriptors and GPIO configuration. This is done in-system using a configuration utility that communicates over the USB interface. It is widely used in application such as blood glucose meter, battery-operated devices, USB-to-UART cables, enables USB connectivity in legacy peripherals with UART, point-of-sale (POS) terminals, industrial and T&M (test and measurement) devices etc.
Documents
Technical documentation and resources
