SN74LVC245ADWR
ActiveOCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74LVC245ADWR
ActiveOCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74LVC245ADWR |
|---|---|
| Current - Output High, Low | 24 mA |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 8 |
| Number of Elements | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 20-SOIC |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Supplier Device Package | 20-SOIC |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 1.65 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.58 | |
| 10 | $ 0.50 | |||
| 25 | $ 0.46 | |||
| 100 | $ 0.37 | |||
| 250 | $ 0.34 | |||
| 500 | $ 0.29 | |||
| 1000 | $ 0.22 | |||
| Digi-Reel® | 1 | $ 0.58 | ||
| 10 | $ 0.50 | |||
| 25 | $ 0.46 | |||
| 100 | $ 0.37 | |||
| 250 | $ 0.34 | |||
| 500 | $ 0.29 | |||
| 1000 | $ 0.22 | |||
| Tape & Reel (TR) | 2000 | $ 0.21 | ||
| 6000 | $ 0.19 | |||
| 10000 | $ 0.18 | |||
| 50000 | $ 0.17 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.38 | |
| 100 | $ 0.26 | |||
| 250 | $ 0.20 | |||
| 1000 | $ 0.13 | |||
Description
General part information
SN74LVC245A-EP Series
This octal bus transceiver is designed for 1.65-V to 3.6-V VCCoperation.
The SN74LVC245A is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE\) input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Documents
Technical documentation and resources
