CAT25080VI-GT3
ActiveEEPROM SERIAL-SPI 8K-BIT 1K X 8 2.5V/3.3V/5V 8-PIN SOIC N T/R
CAT25080VI-GT3
ActiveEEPROM SERIAL-SPI 8K-BIT 1K X 8 2.5V/3.3V/5V 8-PIN SOIC N T/R
Technical Specifications
Parameters and characteristics for this part
| Specification | CAT25080VI-GT3 |
|---|---|
| Memory Format | EEPROM |
| Memory Interface | SPI |
| Memory Organization | 1K x 8 |
| Memory Size | 8 Kbit |
| Memory Type | Non-Volatile |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Supplier Device Package | 8-SOIC |
| Technology | EEPROM |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 1.8 V |
| Write Cycle Time - Word, Page | 5 ms |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.41 | |
| 10 | $ 0.37 | |||
| 25 | $ 0.35 | |||
| 50 | $ 0.34 | |||
| 100 | $ 0.32 | |||
| 250 | $ 0.31 | |||
| 500 | $ 0.30 | |||
| 1000 | $ 0.29 | |||
| Digi-Reel® | 1 | $ 0.41 | ||
| 10 | $ 0.37 | |||
| 25 | $ 0.35 | |||
| 50 | $ 0.34 | |||
| 100 | $ 0.32 | |||
| 250 | $ 0.31 | |||
| 500 | $ 0.30 | |||
| 1000 | $ 0.29 | |||
| Tape & Reel (TR) | 3000 | $ 0.27 | ||
| 6000 | $ 0.26 | |||
| 9000 | $ 0.25 | |||
| 15000 | $ 0.25 | |||
| 21000 | $ 0.24 | |||
| 30000 | $ 0.24 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 0.41 | |
| 10 | $ 0.32 | |||
| 25 | $ 0.32 | |||
| 50 | $ 0.31 | |||
| 100 | $ 0.30 | |||
| 250 | $ 0.29 | |||
| 500 | $ 0.29 | |||
| ON Semiconductor | N/A | 1 | $ 0.21 | |
Description
General part information
CAT25080 Series
The CAT25080 are a EEPROM Serial 8-Kb SPI devices internally organized as 1024x8 bits. They feature a 32-byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. TheHOLDinput may be used to pause any serial communication with the CAT25080 device. These devices feature software and hardware write protection, including partial as well as full array protection.
Documents
Technical documentation and resources
