Integrated Circuits (ICs)

TPS16630RGER

Active

HOT SWAP CONTROLLER 1-CH 60V N-CHANNEL POSITIVE VOLTAGE 24-PIN VQFN EP T/R

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsSingle Point Failure Protection for Motor Drives and PLC Systems TPS16630-32EVM Evaluation Module for TPS1663x (Rev. A)+11

Integrated Circuits (ICs)

TPS16630RGER

Active

Texas Instruments

HOT SWAP CONTROLLER 1-CH 60V N-CHANNEL POSITIVE VOLTAGE 24-PIN VQFN EP T/R

Deep-Dive with AI

DocumentsSingle Point Failure Protection for Motor Drives and PLC Systems TPS16630-32EVM Evaluation Module for TPS1663x (Rev. A)+11

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	TPS16630RGER

Accuracy	2 %
Current - Output	6 A
Function	Electronic Fuse
Mounting Type	Surface Mount
Operating Temperature [Max]	125 ¯C
Operating Temperature [Min]	-40 °C
Package / Case	24-VFQFN Exposed Pad
Supplier Device Package	24-VQFN (4x4)
Voltage - Input [Max]	60 V
Voltage - Input [Min]	4.5 V

TPS16630 Series

4.5-V to 60-V, 31mΩ, 0.6-6A eFuse with output power limiting

Part	Supplier Device Package	Mounting Type	Operating Temperature [Min]	Operating Temperature [Max]	Package / Case	Package / Case [custom]	Package / Case	Function	Accuracy	Voltage - Input [Max]	Voltage - Input [Min]	Current - Output	Voltage - Load [Min]	Voltage - Load [Max]	Switch Type	Input Type	Interface	Fault Protection	Features	Rds On (Typ)	Current - Output (Max) [Max]	Output Configuration	Number of Outputs	Output Type	Ratio - Input:Output [custom]	Utilized IC / Part	Supplied Contents	Secondary Attributes
Texas Instruments TPS16630PWPR	20-HTSSOP	Surface Mount	-40 °C	125 ¯C	20-PowerTSSOP	4.4 mm	0.173 in	Electronic Fuse	2 %	60 V	4.5 V	6 A
Texas Instruments TPS16637PWPR
Texas Instruments TPS16637RGER	24-VQFN (4x4)	Surface Mount	-40 °C	125 ¯C	24-VFQFN Exposed Pad								4.5 V	60 V	General Purpose	Non-Inverting	On/Off	Current Limiting (Adjustable) Over Temperature Over Voltage Short Circuit UVLO	Auto Restart Power Good Slew Rate Controlled Status Flag	30.44 mOhm	6 A	High Side	1	N-Channel	1:1
Texas Instruments TPS16630RGER	24-VQFN (4x4)	Surface Mount	-40 °C	125 ¯C	24-VFQFN Exposed Pad			Electronic Fuse	2 %	60 V	4.5 V	6 A
Texas Instruments TPS16630-32EVM								Electronic Fuses (eFuse)																		TPS1663x	Board(s)	On-Board LEDs

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 3.61
		10	$ 3.03
		100	$ 2.45
		500	$ 2.18
		1000	$ 1.87
	Digi-Reel®	1	$ 3.61
		10	$ 3.03
		100	$ 2.45
		500	$ 2.18
		1000	$ 1.87
	Tape & Reel (TR)	3000	$ 1.76
Texas Instruments	LARGE T&R	1	$ 3.02
		100	$ 2.50
		250	$ 1.79
		1000	$ 1.35

Description

General part information

TPS16630 Series

The TPS1663x is an easy-to-use, positive 60-V, 6-A eFuse with a 31-mΩ integrated FET. Protection for the load, source, and eFuse itself are provided along with adjustable features such as accurate overcurrent protection, fast short circuit protection, output slew rate control, overvoltage protection and undervoltage lockout. The TPS16332 device integrates adjustable output power limiting (PLIM) functionality that simplifies and enables compliance to standards such as IEC61010-1 and UL1310. The device also includes adjustable overcurrent functionality. PGOOD can be used for enable and disable control of the downstream DC/DC converters.

A shutdown pin provides external control for enabling and disabling the internal FET, as well as placing the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault and a precise current monitor output. The MODE pin allows flexibility to configure the device between the two current-limiting fault responses (latch off and auto-retry).

The devices are available in a 4-mm × 4-mm 24-pin VQFN package and are specified over a –40°C to +125°C temperature range.