MAX22910AFD+
Unknown21MΩ, 80V HIGH-SIDE SWITCH WITH ADVANCED DIAGNOSTICS AND LOAD CURRENT MONITORING
Deep-Dive with AI
Search across all available documentation for this part.
MAX22910AFD+
Unknown21MΩ, 80V HIGH-SIDE SWITCH WITH ADVANCED DIAGNOSTICS AND LOAD CURRENT MONITORING
Technical Specifications
Parameters and characteristics for this part
| Specification | MAX22910AFD+ |
|---|---|
| Current - Output (Max) [Max] | 9 A |
| Fault Protection | Current Limiting, Over Load, Short Circuit, UVLO, Over Temperature |
| Input Type | Non-Inverting |
| Interface | Logic |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 23-PowerWFQFN |
| Ratio - Input:Output | 1:1 |
| Rds On (Typ) | 21 mOhm |
| Supplier Device Package | 23-FC2QFN |
| Supplier Device Package [x] | 4.5 |
| Supplier Device Package [y] | 5.75 |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 80 V |
| Voltage - Load [Min] | 4.75 V |
| Voltage - Supply (Vcc/Vdd) [Max] | 5.5 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 1.6 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | N/A | 0 | $ 0.00 | |
Description
General part information
MAX22910 Series
The MAX22910 is an industrial high-side switch that operates as a current sourcing output device. The highside switch has an on-resistance RONof 21mΩ (typ) and 40mΩ (max). The maximum load current is limited and set via the CURLIM resistor in the range of 0.7A to 9A with ±10% accuracy. At +100°C ambient temperature, the maximum continuous load current is up to 7A.The MAX22910 is specified for operation up to 80V (max) supply voltage if OUT does not go below GND. The VLlogic supply allows flexible logic interface levels in the range of 1.6V to 5.5V.Open-wire detection detects wiring faults when the switch is on for load current below a threshold in the range of 1mA to 7mA, as set by the WBSET resistor.Accurate load current monitoring at the IMON current output monitors the load current with ±4% accuracy between 2A and 9A and with ±6% accuracy between 0.7A and 2A when the device is not in the current limit.The MAX22910 is protected against short-circuits, overcurrent, and thermal overload. Achieve fast load turn-off time by connecting an external TVS diode at OUT with a high clamp voltage to clamp inductive kickback energy.The MAX22910 is available in a compact 4.5mm x 5.75mm FC2QFN package and is specified for operation from -40°C to +125°C ambient temperature.APPLICATIONSIndustrial Digital Output ModulesSafety Output ModulesCommercial Vehicle ControllersMotor Holding Brakes
Documents
Technical documentation and resources