Zenode.ai Logo
Beta
20-SSOP
Integrated Circuits (ICs)

TRSF3223ECDBR

Obsolete
Texas Instruments

IC TRANSCEIVER FULL 2/2 20SSOP

Deep-Dive with AI

Search across all available documentation for this part.

20-SSOP
Integrated Circuits (ICs)

TRSF3223ECDBR

Obsolete
Texas Instruments

IC TRANSCEIVER FULL 2/2 20SSOP

Deep-Dive with AI

Technical Specifications

Parameters and characteristics for this part

SpecificationTRSF3223ECDBR
Data Rate1 Mbps
DuplexFull
Mounting TypeSurface Mount
Number of Drivers/Receivers [custom]2
Number of Drivers/Receivers [custom]2
Operating Temperature [Max]70 °C
Operating Temperature [Min]0 °C
Package / Case20-SSOP
ProtocolRS232
Receiver Hysteresis500 mV
Supplier Device Package20-SSOP
TypeTransceiver
Voltage - Supply [Max]5.5 V
Voltage - Supply [Min]3 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$

Description

General part information

TRSF3223E Series

The TRSF3223E consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). This device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The TRSF3223E operates at typical data signaling rates up to 1000 kbits.

Flexible control options for power management are available when the serial port is inactive. The auto-powerdown feature functions when FORCEON is low and FORCEOFF is high. During this mode of operation, if the device does not sense a valid RS-232 signal, the driver outputs are disabled. If FORCEOFF is set low and EN is high, both drivers and receivers are shut off, and the supply current is reduced to 1 mA. Disconnecting the serial port or turning off the peripheral drivers causes auto-powerdown to occur. Auto-powerdown can be disabled when FORCEON and FORCEOFF are high. With auto-powerdown enabled, the device is automatically activated when a valid signal is applied to any receiver input. The INVALID output is used to notify the user if an RS-232 signal is present at any receiver input. INVALID is high (valid data) if any receiver input voltage is greater than 2.7 V or less than –2.7 V, or has been between –0.3 V and 0.3 V for less than 30 µs. INVALID is low (invalid data) if the receiver input voltage is between –0.3 V and 0.3 V for more than 30 µs. Refer to for receiver input levels.

The TRSF3223E consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). This device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The TRSF3223E operates at typical data signaling rates up to 1000 kbits.

Documents

Technical documentation and resources

No documents available