ADP5062ACPZ-2-R7
ActiveLINEAR LI-ION BATTERY CHARGER WITH POWER PATH AND USB COMPATIBILITY IN LFCSP
Deep-Dive with AI
Search across all available documentation for this part.
ADP5062ACPZ-2-R7
ActiveLINEAR LI-ION BATTERY CHARGER WITH POWER PATH AND USB COMPATIBILITY IN LFCSP
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | ADP5062ACPZ-2-R7 |
|---|---|
| Battery Chemistry | Lithium Ion |
| Battery Pack Voltage | 4.3 V |
| Charge Current - Max | 1.3 A |
| Current - Charging | Constant, Programmable |
| Interface | USB, I2C |
| Mounting Type | Surface Mount |
| Number of Cells | 1 |
| Operating Temperature (Max) | 125 °C |
| Operating Temperature (Min) | -40 °C |
| Package / Case | CSP, 20-WFQFN Exposed Pad |
| Package Length | 4 mm |
| Package Name | 20-LFCSP |
| Package Width | 4 mm |
| Voltage - Supply (Max) | 6.7 V |
ADP5062 Series
Linear Li-Ion Battery Charger with Power Path and USB Compatibility in LFCSP
| Part | Supplied Contents | Utilized IC / Part | Contents | Function | Type | Interface | Package / Case | Charge Current - Max | Mounting Type | Package Length | Package Name | Package Width | Battery Chemistry | Number of Cells | Operating Temperature (Max) | Operating Temperature (Min) | Voltage - Supply (Max) | Current - Charging | Battery Pack Voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Analog Devices Inc./Maxim Integrated | Board(s) | ADP5062 | Board | Battery Charger | Power Management | ||||||||||||||
 Analog Devices Inc./Maxim Integrated | I2C USB | 20-WFQFN Exposed Pad CSP | 1.3 A | Surface Mount | 4 mm | 20-LFCSP | 4 mm | Lithium Ion | 1 | 125 °C | -40 °C | 6.7 V | Constant Programmable | 4.3 V | |||||
Analog Devices Inc./Maxim Integrated | I2C USB | 20-WFQFN Exposed Pad CSP | 1.3 A | Surface Mount | 4 mm | 20-LFCSP | 4 mm | Lithium Ion | 1 | 125 °C | -40 °C | 6.7 V | Constant Programmable | 4.3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | Updated |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 4.70 | <1d |
| 10 | $ 3.57 | |||
| 25 | $ 3.29 | |||
| 100 | $ 2.98 | |||
| 250 | $ 2.92 | |||
| Tape & Reel (TR) | 1500 | $ 2.63 | <1d | |
| 3000 | $ 2.58 | |||
CAD
3D models and CAD resources for this part
Description
General part information
ADP5062 Series
The ADP5062 charger is fully compliant with USB 3.0 and the USB Battery Charging Specification 1.2 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.The ADP5062 operates from a 4 V to 6.7 V input voltage range but is tolerant of voltages up to 20 V thereby alleviating concerns about USB bus spikes during disconnect or connect scenarios.The ADP5062 features an internal FET between the linear charger output and the battery. This permits battery isolation and, hence, system powering under a dead battery or no battery scenario, which allows for immediate system function on connection to a USB power supply.Based on the type of USB source, which is detected by an external USB detection chip, the ADP5062 can be set to apply the correct current limit for optimal charging and USB compliance.The ADP5062 has three factory-programmable digital input/out-put pins that provide maximum flexibility for different systems. These digital input/output pins permit combinations of features such as, input current limits, charging enable and disable, charging current limits, and a dedicated interrupt output pin.APPLICATIONSDigital Still CamerasDigital Video CamerasSingle Cell Li-Ion Portable EquipmentPDAs, Audio and GPS DevicesPortable Medical DevicesMobile Phones