MAX9075EUK+T
ActiveANALOG COMPARATORS LOW-COST, ULTRA-SMALL, 3 A SINGLE-SUPPLY COMPARATORS
Deep-Dive with AI
Search across all available documentation for this part.
MAX9075EUK+T
ActiveANALOG COMPARATORS LOW-COST, ULTRA-SMALL, 3 A SINGLE-SUPPLY COMPARATORS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MAX9075EUK+T |
|---|---|
| CMRR, PSRR (Typ) | 77 dB, 82 dB |
| Current - Input Bias (Max) | 0.005 µA |
| Current - Quiescent (Max) [Max] | 6.6 µA |
| Mounting Type | Surface Mount |
| Number of Elements | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 C |
| Output Type | Push-Pull, Rail-to-Rail |
| Package / Case | SOT-753, SC-74A |
| Propagation Delay (Max) [Max] | 580 ns |
| Supplier Device Package | SOT-23-5 |
| Type | General Purpose, Standard (General Purpose) |
| Voltage - Input Offset (Max) [Max] | 1 mV |
| Voltage - Supply, Single/Dual (±) [Max] | 5.5 V |
| Voltage - Supply, Single/Dual (±) [Min] | 2.1 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 4.98 | |
| 10 | $ 3.32 | |||
| 25 | $ 2.89 | |||
| 100 | $ 2.40 | |||
| 250 | $ 2.17 | |||
| 500 | $ 2.03 | |||
| 1000 | $ 1.91 | |||
| Digi-Reel® | 1 | $ 4.98 | ||
| 10 | $ 3.32 | |||
| 25 | $ 2.89 | |||
| 100 | $ 2.40 | |||
| 250 | $ 2.17 | |||
| 500 | $ 2.03 | |||
| 1000 | $ 1.91 | |||
| N/A | 3233 | $ 3.49 | ||
| 17500 | $ 3.49 | |||
| Tape & Reel (TR) | 2500 | $ 1.71 | ||
| Mouser | N/A | 1 | $ 3.49 | |
| 10 | $ 2.63 | |||
| 25 | $ 2.41 | |||
| 100 | $ 2.17 | |||
| 250 | $ 2.06 | |||
| 500 | $ 1.99 | |||
| 1000 | $ 1.93 | |||
| 2500 | $ 1.85 | |||
| 5000 | $ 1.79 | |||
Description
General part information
MAX9075 Series
The MAX9075/MAX9077 single/dual comparators are optimized for 3V and 5V single-supply applications. These comparators have a 580ns propagation delay and consume just 3µA per comparator. The combination of low-power, single-supply operation down to 2.1V, and ultra-small footprint makes these devices ideal for all portable applications.The MAX9075/MAX9077 have a common-mode input voltage range of -0.2V to VCC- 1.2V. Unlike many comparators, there is no differential clamp between the inputs, allowing the differential input voltage range to extend rail-to-rail. All inputs and outputs tolerate a continuous short-circuit fault condition to either rail.The design of the output stage limits supply-current surges while switching (typical of many other comparators), minimizing power consumption under dynamic conditions. Large internal push-pull output drivers allow rail-to-rail output swing with loads up to 2mA, making these devices ideal for interface with TTL/CMOS logic.The MAX9075 single comparator is available in 5-pin SC70 and SOT23 packages, while the MAX9077 dual comparator is available in 8-pin SOT23, µMAX®, and SO packages.ApplicationsBattery-Powered SystemsDigital-Line ReceiversIR ReceiversKeyless EntryThreshold Detectors/Discriminators
Documents
Technical documentation and resources
