Specification	MAX15093AGWL+

Applications	General Purpose
Current - Output (Max) [Max]	15 A
Current - Supply	5.7 mA
Features	Latched Fault, Fault Timeout, Auto Retry
Internal Switch(s)	True
Mounting Type	Surface Mount
Number of Channels [custom]	1
Operating Temperature [Max]	105 ░C
Operating Temperature [Min]	-40 C
Package / Case	WLBGA, 40-WFBGA
Programmable Features	Slew Rate, Fault Timeout, Current Limit, UVLO, OVP, Circuit Breaker
Supplier Device Package	40-WLP
Supplier Device Package [x]	2.57
Supplier Device Package [y]	4.03
Type	Hot Swap Controller
Voltage - Supply [Max]	18 V
Voltage - Supply [Min]	2.7 V

MAX15093A Series

2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output

Part	Features	Mounting Type	Current - Output (Max) [Max]	Current - Supply	Package / Case	Applications	Internal Switch(s)	Type	Voltage - Supply [Max]	Voltage - Supply [Min]	Operating Temperature [Min]	Operating Temperature [Max]	Programmable Features	Number of Channels [custom]	Supplier Device Package [x]	Supplier Device Package	Supplier Device Package [y]
Analog Devices Inc./Maxim Integrated MAX15093AGWL+	Auto Retry Fault Timeout Latched Fault	Surface Mount	15 A	5.7 mA	40-WFBGA WLBGA	General Purpose		Hot Swap Controller	18 V	2.7 V	-40 C	105 ░C	Circuit Breaker Current Limit Fault Timeout OVP Slew Rate UVLO	1	2.57	40-WLP	4.03

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	N/A	0	$ 0.00
		3190	$ 0.00

Description

General part information

MAX15093A Series

The MAX15093/MAX15093A ICs are integrated solutions for hot-swap applications requiring the safe insertion and removal of circuit-line cards from a live backplane. The devices integrate a hot-swap controller, 3.8mΩ power MOSFET, and an electronic circuit-breaker protection in a single package.The devices integrate an accurate current-sense circuitry and provide 160µA/A of proportional output current. The devices are designed for protection of 2.7V to 18V supply voltages.These devices implement a foldback current limit during startup to control inrush current lowering di/dt and keep the MOSFET operating under safe operating area (SOA) conditions. After the startup cycle is complete, on-chip comparators provide VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, and immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The devices are factory calibrated to deliver accurate overcurrent protection with ±10% accuracy. During a fault condition, the MAX15093 latches off, while the MAX15093A enters autoretry mode.The devices feature an IN-to-OUT short-circuit detection before startup. The devices provide a power-MOSFET GATE pin to program the slew rate during startup by adding an external capacitor. The devices have overvoltage/undervoltage input pins that can detect an overvoltage/undervoltage fault and disconnect the IN from the OUT. Additional features include internal overtemperature protection, power-good output, and fault-indicator output.The MAX15093/MAX15093A ICs are available in a 40-bump, 2.57mm x 4.03mm, power wafer-level package (WLP) and are rated over the -40°C to +105°C extended temperature range.ApplicationsDisk Drive PowerIndustrialRAID SystemsServer I/O CardsStorage Bridge Bay

Documents

Technical documentation and resources

MAX15093-MAX15093A: 2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output Data Sheet (Rev.4)

Data Sheet