Specification	SN74ALVCH16835DGVR

Current - Output High, Low	24 mA
Logic Type	Universal Bus Driver
Mounting Type	Surface Mount
Number of Circuits	18 Bit
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	0.173 in
Package / Case	56-TFSOP
Package / Case [y]	4.4 mm
Supplier Device Package	56-TVSOP
Voltage - Supply [Max]	3.6 V
Voltage - Supply [Min]	1.65 V

SN74ALVCH16835 Series

18-Bit Universal Bus Driver With 3-State Outputs

Part	Number of Circuits	Package / Case	Package / Case	Package / Case	Voltage - Supply [Min]	Voltage - Supply [Max]	Current - Output High, Low	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Logic Type	Supplier Device Package	Package / Case	Package / Case [y]
Texas Instruments SN74ALVCH16835DGGR	18 Bit	6.1 mm	0.24 in	56-TFSOP	1.65 V	3.6 V	24 mA	Surface Mount	85 °C	-40 °C	Universal Bus Driver	56-TSSOP
Texas Instruments SN74ALVCH16835DL	18 Bit	7.5 mm	0.295 in	56-BSSOP	1.65 V	3.6 V	24 mA	Surface Mount	85 °C	-40 °C	Universal Bus Driver	56-SSOP
Texas Instruments SN74ALVCH16835DGG
Texas Instruments SN74ALVCH16835DGVR	18 Bit			56-TFSOP	1.65 V	3.6 V	24 mA	Surface Mount	85 °C	-40 °C	Universal Bus Driver	56-TVSOP	0.173 in	4.4 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.54
	Digi-Reel®	1	$ 2.54
	Tape & Reel (TR)	2000	$ 1.16
		6000	$ 1.12
Texas Instruments	LARGE T&R	1	$ 1.91
		100	$ 1.58
		250	$ 1.14
		1000	$ 0.85

Description

General part information

SN74ALVCH16835 Series

This 18-bit universal bus driver is designed for 1.65-V to 3.6-V VCCoperation.

Data flow from A to Y is controlled by the output-enable (OE)\ input. The device operates in the transparent mode when the latch-enable (LE) input is high. The A data is latched if the clock (CLK) input is held at a high or low logic level. If LE is low, the A data is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE\ is high, the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.