TRS213EIDBR
Active5V MULTICHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH ±9V OUTPUT AND ±15KV IEC ESD PROTECTION
Deep-Dive with AI
Search across all available documentation for this part.
TRS213EIDBR
Active5V MULTICHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH ±9V OUTPUT AND ±15KV IEC ESD PROTECTION
Technical Specifications
Parameters and characteristics for this part
| Specification | TRS213EIDBR |
|---|---|
| Data Rate | 120 Kbps |
| Duplex | Full |
| Mounting Type | Surface Mount |
| Number of Drivers/Receivers [custom] | 5 |
| Number of Drivers/Receivers [custom] | 4 |
| Operating Temperature [Max] | 85 C |
| Operating Temperature [Min] | -40 ¯C |
| Package / Case | 28-SSOP (0.209", 5.30mm Width) |
| Protocol | RS232 |
| Receiver Hysteresis | 500 mV |
| Supplier Device Package | 28-SSOP |
| Type | Transceiver |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | N/A | 1978 | $ 2.03 | |
| Texas Instruments | LARGE T&R | 1 | $ 1.46 | |
| 100 | $ 1.20 | |||
| 250 | $ 0.86 | |||
| 1000 | $ 0.65 | |||
Description
General part information
TRS213E Series
The TRS213E consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15kV IEC ESD protection on the RS-232 bus pins. The device meets the requirements of TIA/EIA-232-F, and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 250kbit/s and a maximum of 30V/µs driver output slew rate.
The TRS213E has an active-low shutdown (SHDN) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V– is pulled to GND, and the transmitter outputs are disabled. This reduces supply current typically to 1µA. Two receivers of the TRS213E are active during shutdown.
The TRS213E consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15kV IEC ESD protection on the RS-232 bus pins. The device meets the requirements of TIA/EIA-232-F, and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 250kbit/s and a maximum of 30V/µs driver output slew rate.
Documents
Technical documentation and resources