Development Boards, Kits, Programmers

TPS54362BEVM

Active

Texas Instruments

EVAL MODULE FOR TPS54362

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet

Development Boards, Kits, Programmers

TPS54362BEVM

Active

Texas Instruments

EVAL MODULE FOR TPS54362

Deep-Dive with AI

DocumentsDatasheet

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	TPS54362BEVM

Board Type	Fully Populated
Current - Output	3 A
Frequency - Switching	500 kHz
Main Purpose	DC/DC, Step Down
Outputs and Type	Non-Isolated
Outputs and Type	1
Regulator Topology	Buck
Supplied Contents	Board(s)
Utilized IC / Part	TPS54362B-Q1
Voltage - Input [Max]	48 V
Voltage - Input [Min]	6 V
Voltage - Output	5 V

TPS54362-Q1 Series

Automotive 3.6V to 48V, 3A Buck Converter with Low Iq and Voltage Supervisor

Part	Voltage - Input (Min) [Min]	Frequency - Switching [Max]	Frequency - Switching [Min]	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	Function	Qualification	Voltage - Output (Max) [Max]	Current - Output	Grade	Output Type	Package / Case	Package / Case [custom]	Package / Case	Voltage - Output (Min/Fixed)	Number of Outputs	Mounting Type	Output Configuration	Voltage - Input (Max) [Max]	Topology	Voltage - Output	Board Type	Main Purpose	Outputs and Type	Outputs and Type	Utilized IC / Part	Frequency - Switching	Regulator Topology	Supplied Contents	Voltage - Input [Max]	Voltage - Input [Min]
Texas Instruments TPS54362QPWPRQ1	3.6 V	2.2 MHz	200 kHz	20-HTSSOP	150 °C	-40 °C	Step-Down	AEC-Q100	18 V	3 A	Automotive	Adjustable	20-PowerTSSOP	4.4 mm	0.173 in	0.9 V	1	Surface Mount	Positive	48 V	Buck
Texas Instruments TPS54362BQPWPRQ1	3.6 V	2.2 MHz	200 kHz	20-HTSSOP	150 °C	-40 °C	Step-Down	AEC-Q100	18 V	3 A	Automotive	Adjustable	20-PowerTSSOP	4.4 mm	0.173 in	0.9 V	1	Surface Mount	Positive	48 V	Buck
Texas Instruments TPS54362AQPWPRQ1	3.6 V	2.2 MHz	200 kHz	20-HTSSOP	150 °C	-40 °C	Step-Down	AEC-Q100	18 V	3 A	Automotive	Adjustable	20-PowerTSSOP	4.4 mm	0.173 in	0.9 V	1	Surface Mount	Positive	48 V	Buck
Texas Instruments TPS54362HPWP	3.6 V	2.2 MHz	200 kHz	20-HTSSOP	175 ░C	-55 °C	Step-Down		18 V	1 A		Adjustable	20-PowerTSSOP	4.4 mm	0.173 in	0.9 V	1	Surface Mount	Positive	48 V	Buck
Texas Instruments TPS54362BEVM										3 A												5 V	Fully Populated	DC/DC Step Down	Non-Isolated	1	TPS54362B-Q1	500 kHz	Buck	Board(s)	48 V	6 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Box	1	$ 118.80

Description

General part information

TPS54362-Q1 Series

The TPS54362-Q1 device is a step-down switch-mode power supply with a low-power mode and a programmable voltage supervisor. Integrated input voltage-line feed-forward topology improves line transient regulation of the voltage-mode buck regulator. The regulator has a cycle-by-cycle current limit. Pulse-skip mode operation under no load reduces the supply current to 65 µA. Using the enable pin reduces the supply shutdown current to 1 µA.

An open-drain reset signal indicates when the nominal output drops below the threshold set by an external resistor-divider network. A soft-start capacitor controls the output voltage start-up ramp. The device activates an internal undervoltage shutdown when the input supply ramps down to 2.6 V.

Frequency foldback operation protects the device during an overload conditions on the output. The device also has thermal shutdown protection due to excessive power dissipation.

Documents

Technical documentation and resources