Specification	5962-9557701NXD

Current - Output High, Low [custom]	24 mA
Current - Output High, Low [custom]	48 mA
Mounting Type	Surface Mount
Number of Bits per Element [custom]	9
Number of Elements	4
Operating Temperature [Max]	125 °C
Operating Temperature [Min]	-55 °C
Output Type	3-State
Package / Case	100-LQFP
Supplier Device Package	100-LQFP (14x14)
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V

5962-9557701 Series

36-Bit Bus Transceivers With 3-State Outputs

Part	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Number of Bits per Element [custom]	Supplier Device Package	Number of Elements	Package / Case	Voltage - Supply [Max]	Voltage - Supply [Min]	Output Type	Current - Output High, Low [custom]	Current - Output High, Low [custom]
Texas Instruments 5962-9557701NXD	Surface Mount	125 °C	-55 °C	9	100-LQFP (14x14)	4	100-LQFP	5.5 V	4.5 V	3-State	24 mA	48 mA

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Bulk	6	$ 57.10
	N/A	787	$ 85.99
Texas Instruments	JEDEC TRAY (10+1)	1	$ 69.55
		100	$ 61.83
		250	$ 50.82
		1000	$ 45.46

Description

General part information

5962-9557701 Series

The 'ABTH32245 are 36-bit (quad 9-bit) noninverting 3-state transceivers designed for synchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.

These devices can be used as four 9-bit transceivers, two18-bit transceivers, or one 36-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) inputs. The output-enable (OE\) inputs can be used to disable the device so that the buses are effectively isolated.

When VCCis between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Documents

Technical documentation and resources

5962-9557701NXD

Deep-Dive with AI

5962-9557701NXD

Deep-Dive with AI

Technical Specifications

5962-9557701 Series

Pricing

Description

5962-9557701 Series

Documents

Designing With Logic (Rev. C)

Selecting the Right Level Translation Solution (Rev. A)

36-Bit Bus Transceivers With 3-State Outputs datasheet (Rev. G)

Quad Flatpack No-Lead Logic Packages (Rev. D)

Understanding Advanced Bus-Interface Products Design Guide

Live Insertion

Implications of Slow or Floating CMOS Inputs (Rev. E)

Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)

Advanced BiCMOS Technology (ABT) Logic Enables Optimal System Design (Rev. A)

Logic Guide (Rev. AB)

Input and Output Characteristics of Digital Integrated Circuits

Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices

Advanced BiCMOS Technology (ABT) Logic Characterization Information (Rev. B)

LOGIC Pocket Data Book (Rev. B)

Semiconductor Packing Material Electrostatic Discharge (ESD) Protection

Family of Curves Demonstrating Output Skews for Advanced BiCMOS Devices (Rev. A)

Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)

Advanced Bus Interface Logic Selection Guide

TI IBIS File Creation, Validation, and Distribution Processes

5962-9557701 Series