S
STMicroelectronics
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Category | Description |
|---|---|---|
STMicroelectronics EMIF09-SD01F3Obsolete | Filters | FILTER RC(PI) 40 OHM/20PF SMD |
STMicroelectronics | Integrated Circuits (ICs) | STM32 DYNAMIC EFFICIENCY MCU WITH BAM, HIGH-PERFORMANCE AND DSP WITH FPU, ARM CORTEX-M4 MCU WITH 1 MBYTE OF FLASH MEMORY, 100 MHZ CPU, ART ACCELERATOR, DFSDM |
STMicroelectronics | Integrated Circuits (ICs) | 32-BIT POWER ARCHITECTURE MCU FOR AUTOMOTIVE BODY AND GATEWAY APPLICATIONS |
STMicroelectronics | Integrated Circuits (ICs) | MCU 32-BIT E200Z0H RISC 128KB FLASH 3.3V/5V AUTOMOTIVE AEC-Q100 64-PIN LQFP T/R |
STMicroelectronics | Development Boards Kits Programmers | DEMONSTRATION BOARD FOR SINGLE CHANNEL OP-AMP IN SO8 PACKAGE |
STMicroelectronics LDLN025J30RLTB | Integrated Circuits (ICs) | IC REG LINEAR 3V 250MA 4FLIPCHIP |
STMicroelectronics ST25RU3993-EVALObsolete | Development Boards Kits Programmers | ST25RU3993 READER IC EVALUATION BOARD |
STMicroelectronics | Integrated Circuits (ICs) | ARM-BASED 32-BIT MCU+FPU, 84MHZ, 128KB FLASH, 49-PIN WLCSP, -40 TO 85°C T/R |
STMicroelectronics STP12NM60NObsolete | Discrete Semiconductor Products | MOSFET N-CH 600V 10A TO220AB |
STMicroelectronics VND1NV04Obsolete | Integrated Circuits (ICs) | IC PWR DRIVER N-CHANNEL 1:1 DPAK |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
ECMF4-2459A6M10Y4 lines Common mode filter with ESD protection for High Speed Serial interface | Common Mode Chokes | 3 | Active | The ECMF4-2459A6M10Y is an integrated common mode filter designed to suppress EMI/RFI common mode noise on high speed buses HDMI 2.0, HDMI2.1, HDMI 1.4 and DisplayPort, FPD link III, GMSL, USB3.2 generation 1 and 2 , MIPI. It is designed to replace discrete common mode chokes or LTCC.
The device embeds ESD protections on connector side to meet ISO 10605 requirements.
Packaged in QFN-10L with wettable flank, it is compatible with automatic visual inspection. |
| Development Boards, Kits, Programmers | 1 | Obsolete | ||
| Battery Products | 1 | Obsolete | ||
| Filters | 1 | Active | ||
EMIF02-MIC03F22-line EMI filter and ESD protection for microphones | EMI/RFI Filters (LC, RC Networks) | 7 | Obsolete | The EMIF02-MIC03F2 is a highly integrated device designed to suppress EMI/RFI noise in all systems subjected to electromagnetic interferences. The EMIF02 Flip-Chip packaging means the package size is equal to the die size.
This filter includes an ESD protection circuitry which prevents damage to the application when subjected to ESD surges up 15 kV. |
| Filters | 2 | Obsolete | ||
EMIF06-1005MX12Y6-line EMI filter and ESD protection for mini and micro SD card interfaces | EMI/RFI Filters (LC, RC Networks) | 7 | Active | The EMIF06-1005M12 is a 6-line, highly integrated device designed to suppress EMI/RFI noise in all systems exposed to electromagnetic interference.
This filter includes ESD protection circuitry, which prevents damage to the application when subjected to ESD surges up to 15 kV on the input pins. |
EMIF08-VID01F28-line EMI filter and ESD protection for display interfaces | Filters | 3 | Active | The EMIF08-VID01F2 is an 8 line highly integrated device designed to suppress EMI/RFI noise in all systems subjected to electromagnetic interference. The flip chip packaging means the package size is equal to the die size.
This filter includes ESD protection circuitry, which prevents damage to the application when it is subjected to ESD surges up to 15kV. |
| EMI/RFI Filters (LC, RC Networks) | 2 | Obsolete | ||
ESD051-1F4Low clamping single line unidirectional ESD protection | Transient Voltage Suppressors (TVS) | 1 | Active | The ESD051-1F4 is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
This ESD suppressor is ideal for applications where PCB space saving is required such as cellular handsets and accessories, wearable devices, USB buses, battery lines. |