R
Rohm Semiconductor
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Category | Description |
|---|---|---|
 Rohm Semiconductor | Optoelectronics | LED GREEN CLEAR T-1 T/H |
 Rohm Semiconductor MCR10EZPF8252Unknown | Resistors | RES SMD 82.5K OHM 1% 1/8W 0805 |
 Rohm Semiconductor | Resistors | RES SMD 33K OHM 5% 1/4W 1206 |
 Rohm Semiconductor | Resistors | RES 910K OHM 5% 1/4W 0603 |
Rohm Semiconductor MCR03EZPFX2260Unknown | Resistors | RES SMD 226 OHM 1% 1/10W 0603 |
Rohm Semiconductor ESR10EZPF4121NRND | Resistors | RES 4.12K OHM 1% 2/5W 0805 |
 Rohm Semiconductor MCR25JZHFLR270Unknown | Resistors | RES 0.27 OHM 1% 1/2W 1210 |
Rohm Semiconductor ESR10EZPF4R32NRND | Resistors | RES 4.32 OHM 1% 1/2W 0805 |
Rohm Semiconductor MCR18EZPJ1R6Unknown | Resistors | RES SMD 1.6 OHM 5% 1/4W 1206 |
 Rohm Semiconductor | Resistors | RES, 240K, 1%, 0.25W, THICK FILM, 0603 ROHS COMPLIANT: YES |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Power Management (PMIC) | 1 | Obsolete | ||
| Power Management (PMIC) | 1 | Obsolete | ||
| Power Management (PMIC) | 2 | Obsolete | ||
BD3533F3A Variable Output Termination Regulator for DDR-SDRAMs | Integrated Circuits (ICs) | 1 | Active | BD3533F is a termination regulator that complies with JEDEC requirements for DDR-SDRAM. This linear power supply uses a built-in N-channel MOSFET and high-speed OP-AMPS specially designed to provide excellent transient response. It has a sink/source current capability up to 1A and has a power supply bias requirement of 3.3V to 5.0V for driving the N-channel MOSFET. By employing an independent reference voltage input (VDDQ) and a feedback pin (VTTS), this termination regulator provides excellent output voltage accuracy and load regulation as required by JEDEC standards. Additionally, BD3533 has a reference power supply output (VREF) for DDR-SDRAM or for memory controllers. Unlike the VTT output that goes to "Hi-Z" state, the VREF output is kept unchanged when EN input is changed to "Low", making this IC suitable for DDR-SDRAM under "Self Refresh" state. |
| Power Management (PMIC) | 1 | NRND | ||
| Special Purpose Regulators | 1 | Obsolete | ||
| Integrated Circuits (ICs) | 1 | NRND | ||
BD35391A Variable Output Termination Regulator for DDR-SDRAMs | Integrated Circuits (ICs) | 2 | Active | BD3539FVM is a termination regulator that complies with JEDEC requirements for DDR1-SDRAM, DDR2-SDRAM, and DDR3-SDRAM. This linear power supply uses a built-in N-channel MOSFET and high-speed OP-AMPS specially designed to provide excellent transient response. It has a sink/source current capability of up to 1A and has a power supply bias requirement of 3.3 V (for DDR2 and DDR3) and 5.0 V (for DDR1, DDR2, and DDR3) for driving the N-channel MOSFET. By employing an independent reference voltage input (VDDQ) and a feedback pin (VTTS), this termination regulator provides excellent output voltage accuracy and load regulation as required by JEDEC standards. Additionally, BD3539 has a reference power supply output (VREF)for DDR-SDRAM or for memory controllers. Unlike the VTT output that goes to "Hi-Z" state, the VREF output is kept unchanged when EN input is changed to "Low", making this IC suitable for DDR-SDRAM under "Self Refresh" state. |
BD35390FJ1A Variable Output Termination Regulator for DDR-SDRAMs | Power Management (PMIC) | 1 | Active | BD35390FJ is a termination regulator that complies with JEDEC requirements for DDR1/2/3-SDRAM. This linear power supply uses a built-in N-channel MOSFET and high-speed OP-AMPS specially designed to provide excellent transient response. It has a sink/source current capability up to 1A and has a power supply bias requirement of 3.3V to 5.0V for driving the N-channel MOSFET. By employing an independent reference voltage input (VDDQ) and a feedback pin (VTTS), this termination regulator provides excellent output voltage accuracy and load regulation as required by JEDEC standards. |
BD35395FJ-M1A Termination Regulator for DDR-SDRAMs | Power Management (PMIC) | 1 | Active | BD35395FJ-M is a termination regulator compatible with JEDEC DDR1/2/3/3L-SDRAM, which functions as a linear power supply incorporating an N-channel MOSFET and provides a sink/source current capability up to 1A respectively. A built-in high-speed OP-AMP specially designed offers an excellent transient response. Requires 3.3 volts or 5.0 volts as a bias power supply to drive the N-channel MOSFET. Has an independent reference voltage input pin (VDDQ) and an independent feedback pin (VTTS) to maintain the accuracy in voltage required by JEDEC, and offers an excellent output voltage accuracy and load regulation.Power Supply Reference BoardFor Xilinx’s FPGA Spartan-7 |