| Circuit Protection | 1 | Obsolete | |
NV24C04MUWEEPROM Serial 4-Kb I<sup>2</sup>C - Automotive Grade | Integrated Circuits (ICs) | 1 | Active | The NV24C04 is a EEPROM Serial 4-Kb I2C - Automotive Grade device organized internally as 32 pages of 16 bytes each. This device supports both the Standard (100 kHz) as well as Fast (400 kHz) I2C protocol.Data is written by providing a starting address, then loading 1 to 16 contiguous bytes into a Page Write Buffer, and then writing all data to non-volatile memory in one internal write cycle. Data is read by providing a starting address and then shifting out data serially while automatically incrementing the internal address count.External address pins make it possible to address up to four NV24C04 devices on the same bus. |
NV24C08LVEEPROM Serial 8-Kb I<sup>2</sup>C - Automotive Grade | Memory | 3 | Active | The NV24C08LV is a 8 Kb CMOS Serial EEPROM device, internally organized as 64 pages of 16 bits each.It features a 16−byte page write buffer and supports the Standard (100 kHz), Fast (400 kHz) and Fast−Plus (1 MHz) I2C protocol. |
NV24C16LVEEPROM Serial 16-Kb I<sup>2</sup>C - Automotive Grade | Memory | 1 | Active | The NV24C16LV is a 16 Kb CMOS Serial EEPROM device, internally organized as 128 pages of 16 bits each.It features a 16−byte page write buffer and supports the Standard (100 kHz), Fast (400 kHz) and Fast−Plus (1 MHz) I2C protocol. |
NV24C64MUWEEPROM Serial 64-Kb I<sup>2</sup>C - Automotive Grade | Memory | 3 | Active | The NV24C64LV is a EEPROM Serial 64-Kb I2C - Automotive Grade device, internally organized as 8192 words of 8 bits each.It features a 32−byte page write buffer and supports the Standard (100 kHz), Fast (400 kHz) and Fast−Plus (1 MHz) I2C protocol. |
NV25010EEPROM Serial 1-Kb SPI - Automotive Grade 0 (+150°C) | Memory | 2 | Active | NV25010 is a EEPROM Serial 1-Kb SPI - Automotive Grade 0 device internally organized as 128x8 bits. It features a 16−byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pauseany serial communication with the NV250x0 device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page which can be permanently write protected. |
NV25020MUWEEPROM Serial 2-Kb SPI - Automotive Grade 1 (+125°C), Wettable Flank UDFN Package | Memory | 3 | Active | NV25020 is a EEPROM Serial 2-Kb SPI - Automotive Grade 0 (+150°C) device internallyorganized as 256x8 bits. It features a 16−byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV250x0 device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page whichcan be permanently write protected. |
NV25080MUWEEPROM Serial 8-Kb SPI - Automotive Grade 1 (+125°C), Wettable Flank UDFN Package | Memory | 5 | Active | NV25080 are a EEPROM Serial 8-Kb SPI - Automotive Grade 0 (+150°C) devices internallyorganized as 1Kx8 bits. It features a 32−byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page which can be permanently write protected. |
NV25128MUWEEPROM Serial 128-Kb SPI - Automotive Grade 1 (+125°C), Wettable Flank UDFN Package | Integrated Circuits (ICs) | 5 | Active | NV25128 is a EEPROM Serial 128-Kb SPI - Automotive Grade 0 (+150°C) device internally organized as 16Kx8 bits. It features a 64−byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device. The device features software and hardware write protection, including partial as well as full array protection. Level On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page which can be permanently write protected. |
NV25160MUWEEPROM Serial 16-Kb SPI - Automotive Grade 0 (+150°C) | Memory | 2 | Active | NV25160 is a EEPROM Serial 16-Kb SPI - Automotive Grade 0 (+150°C) device internallyorganized as 2Kx8 bits. It features a 32−byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page which can be permanently write protected. |