MCP80223-Phase Brushless DC (BLDC) Motor Gate Driver with Power Module, Sleep Mode, Op Amps | Motor Drivers, Controllers | 1 | Active | The MCP8022 device is a 3-phase Brushless DC (BLDC) power module containing three integrated half-bridge drivers, capable of driving three external NMOS/NMOS transistor pairs. The three phase half-bridge gate driver is capable of delivering a peak output current of 0.5A at 12V for driving high-side and low-side NMOS MOSFET transistors. The driver has shoot-through, overcurrent, and short-circuit protection. A Sleep mode has been added.
The MCP8021/2 devices integrate a 3.3V or 5.0V LDO regulator for supplying power to the host and peripherals, and an overtemperature sensor. The on-board 3.3V or 5.0V dropout voltage regulators are capable of delivering 70 mA of current. The voltage option is selected by part number.
The follow functions are user-configurable: dead time, blanking time, op amp enable/disable during standby, enable/ disable Sleep mode, enable/disable overcurrent detection, and enable/disable gate drive undervoltage protection.
Three independent operational amplifiers are added for general use.
The MPLAB® Mindi™ model is included in the [MPLAB® Mindi™ Analog Simulator](https://www.microchip.com/en-us/tools-resources/develop/analog-development-tool-ecosystem/mplab-mindi-analog-simulator).
Functional Safety features are listed here: [Motor Gate Drivers for Functional Safety Designs](https://www.microchip.com/en-us/products/sensors-and-motor-drive/motor-drivers/functional-safety-motor-gate-drivers) |
| Power Management (PMIC) | 2 | Active | |
MCP8025AThree-Phase Brushless DC Motor Gate Driver with Power Module, Sleep Mode, LIN Transceiver | Motor Drivers, Controllers | 10 | Active | The MCP8025A is a 3-Phase brushless motor gate driver and power module that integrates the following features: key-off Sleep mode, a LIN transceiver, a buck voltage regulator, two LDO regulators, power monitoring comparators, an over-temperature sensor, a zero-crossing detector, a neutral simulator, a comparator, and an operational amplifier for motor current monitoring.
The phase comparator and multiplexer allow for hardware commutation detection. The neutral simulator allows commutation detection without a neutral tap in the motor. The buck converter is capable of delivering 750 mW of power for powering a companion microcontroller. The buck regulator may be disabled if not used. The on-board 5V and 12V low dropout voltage regulators are capable of delivering 30 mA of current.
The MCP8025A supports a broad temperature range of -40°C to +150°C. Package options include the 40-lead 5x5 QFN and 48-lead 7x7 TQFP. |
| Power Management (PMIC) | 7 | Active | |
MCP8027Integrated 3-Phase BLDC Motor Driver with Buck Regulator and Sleep Mode, Level Shifter, Operational Amplifier | Integrated Circuits (ICs) | 2 | Active | The MCP8027 is a 3-Phase brushless gate driver with power module and 5 uA (typ) sleep-mode current. The MCP8027 device integrates three half-bridge drivers to drive external NMOS/NMOS transistor pairs configured to drive a 3-phase BLDC motor, a comparator, a voltage regulator to provide bias to a companion microcontroller, power monitoring comparators, an overtemperature sensor, two level translators and three operational amplifiers for motor current monitoring.
The MCP8027 has three half-bridge drivers capable of delivering a peak output current of 0.5A at 12V for driving high-side and low-side NMOS MOSFET transistors. The drivers have shoot-through, overcurrent, and short-circuit protection.
The MCP8027 buck converter is capable of delivering 750 mW of power for powering a companion microcontroller. The buck regulator may be disabled if not used. The on board 5V and 12V low dropout voltage regulators are capable of delivering 30 mA of current.
The MCP8027 operation is specified over a temperature range of -40°C to +150°C. Package options include the 40-lead 5x5 QFN and 48-lead 7x7 TQFP. |
MCP8063Three-Phase Brushless Sinusoidal Sensorless Motor Driver | Integrated Circuits (ICs) | 3 | Active | The MCP8063 is a highly integrated sinusoidal sensorless driver for brushless DC motors. It features 180° sinusoidal drive for high torque output and silent operation. It is intended to cover a wide range of motor characteristics, while requiring no external tuning from the user. Speed control can be achieved through either power supply or pulse-width-modulation (using the PWM digital input pin). The compact packaging and minimum bill-of-material (BOM), it is best suited for fan applications that require high efficiency and low acoustic noise. Frequency generator output is also included, enabling for precision speed control in closed-loop applications. The MCP8063 driver includes a lockup protection mode, which turns-off the output current when the motor is under lock condition, and an automatic recovery that enables the fan to run when the lock condition is removed. Automotive AEC-Q100 Qualified, PPAP Available Upon Request. |
MCP809Microcontroller Supervisory Circuit w/ Push Pull Active Low | Supervisors | 7 | Active | The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. MCP809 has a CMOS push-pull output with active low reset and is available in a choice of seven different trip voltages. It operates over the extended industrial temperature range (-40°C/+85°C). MCP809 is available in a SOT23-3 package. |
MCP810Microcontroller Supervisory Circuit w/ Push Pull Active High | Power Management (PMIC) | 4 | Active | The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. MCP809 has a CMOS push-pull output with active high reset and is available in a choice of seven different trip voltages. It operates over the extended industrial temperature range (-40°C/+85°C). MCP810 is available in a SOT23-3 package. |
| Transistors | 1 | Obsolete | |
| FETs, MOSFETs | 1 | Obsolete | |
