| Amplifiers | 3 | Active | The MCP6L71 operational amplifier has 2MHz Gain Bandwidth Product and a low 150uA per amplifier quiescent current. The MCP6L71 operates on supply votages between 2.0V to 6.0V, with rail-to-rail input and output swing. The MCP6L71 is offered in SOT 23, SOIC and MSOP packages. |
| Linear | 1 | Active | The MCP6L72 operational amplifier has 2MHz Gain Bandwidth Product and a low 150uA per amplifier quiescent current. The MCP6L72 operates on supply votages between 2.0V to 6.0V, with rail-to-rail input and output swing. The MCP6L72 is avaiable in SOIC and MSOP packages. |
| Linear | 2 | Active | The MCP6L74 operational amplifier has 2MHz Gain Bandwidth Product and a low 150uA per amplifier quiescent current. The MCP6L74 operates on supply votages between 2.0V to 6.0V, with rail-to-rail input and output swing. The MCP6L74 is available in 14-pin SOIC and TSSOP packages. |
| Instrumentation, Op Amps, Buffer Amps | 1 | Active | The MCP6L91/1R/2/4 family of operational amplifiers has a 10 MHz Gain Bandwidth Product and a low 850uA per amplifier quiescent current. These op amps operate on supply voltages between 2.4V to 6.0V, with rail-to-rail input and output swing. They are available in the extended temperature range. |
| Amplifiers | 2 | Active | The MCP6L91/1R/2/4 family of operational amplifiers has a 10 MHz Gain Bandwidth Product and a low 850uA per amplifier quiescent current. These op amps operate on supply voltages between 2.4V to 6.0V, with rail-to-rail input and output swing. They are available in the extended temperature range. |
| Instrumentation, Op Amps, Buffer Amps | 1 | Active | The MCP6L91/1R/2/4 family of operational amplifiers has a 10 MHz Gain Bandwidth Product and a low 850uA per amplifier quiescent current. These op amps operate on supply voltages between 2.4V to 6.0V, with rail-to-rail input and output swing. They are available in the extended temperature range. |
MCP6N11500 kHz, 800 µA Instrumentation Amplifier | Instrumentation, OP Amps, Buffer Amps | 14 | Active | The MCP6N11 single instrumentation amplifier is optimized for
single-supply operation with rail-to-rail input and output performance.
Two external resistors set the gain, minimizing gain error and drift
over temperature. The supply voltage range of 1.8V to 5.5V is low enough
to support many portable applications. All devices are fully specified
from -40 to +125C. |
MCP6N16Zero-Drift Instrumentation Amplifier | Development Boards, Kits, Programmers | 13 | Active | The MCP6N16 is a zero-drift instrumentation amplifier designed for single-supply operation with rail-to-rail input (no common mode crossover distortion) and output performance. The supply voltage range is low enough to support many portable applications. All devices are fully specified from -40ºC to +125ºC. Each device has EMI filters at the input pins, providing superior EMI rejection. This family has three minimum gain options (1, 10 and 100 V/V) in order to allow the user to optimize the input offset voltage and input noise for different applications. |
MCP6S21Single-Ended, Rail-to-Rail I/O, Low Gain PGA | Linear | 1 | Active | The MCP6S21, MCP6S22, MCP6S26, and MCP6S28 Programmable Gain Amplifiers offer 1, 2, 6 or 8 input channels respectively and eight steps of gain. These devices are programmable over an SPI bus and thus add gain control and input channel selection to the embedded control system. This is all achieved in one simple integration that allows for considerably greater bandwidth at a low supply current. |
MCP6S22Single-Ended, Rail-to-Rail I/O, Low Gain PGA | Amplifiers | 4 | Active | The MCP6S21, MCP6S22, MCP6S26, and MCP6S28 Programmable Gain Amplifiers offer 1, 2, 6 or 8 input channels respectively and eight steps of gain. These devices are programmable over an SPI bus and thus add gain control and input channel selection to the embedded control system. This is all achieved in one simple integration that allows for considerably greater bandwidth at a low supply current. |
