M
Microchip Technology
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
| Part | Category | Description |
|---|---|---|
Microchip Technology | Crystals Oscillators Resonators | CMOS OUTPUT CLOCK OSCILLATOR, 24MHZ NOM |
 Microchip Technology | Crystals Oscillators Resonators | MEMS OSC |
 Microchip Technology | Integrated Circuits (ICs) | 1GHZ ARM CORTEX A7 W/ MIPI CAMERA AND 2GB INTEGRATED DDR3L |
 Microchip Technology | Discrete Semiconductor Products | DIODE GEN PURP 100V 12A DO203AA |
 Microchip Technology MSMBJ5372BLTB | Circuit Protection | VOLTAGE REGULATOR |
 Microchip Technology | Integrated Circuits (ICs) | OPERATIONAL AMPLIFIER, 1 CHANNELS, 10 MHZ, 15 V/ΜS, 2.2V TO 5.5V, SOT-23, 5 PINS |
Microchip Technology LE9531CMQCTObsolete | Integrated Circuits (ICs) | IC TELECOM INTERFACE 28QFN |
 Microchip Technology MCP2021-330E/MD-AE2VAOObsolete | Integrated Circuits (ICs) | IC TRANSCEIVER |
 Microchip Technology | Integrated Circuits (ICs) | MCU 8-BIT PIC16 PIC RISC 3.5KB FLASH 3.3V/5V 18-PIN SOIC W TUBE |
Microchip Technology VCC6-LCF-212M500000Obsolete | Crystals Oscillators Resonators | DIFFERENTIAL XO +3.3 VDC +/-5% L |
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
MCP6072.5V to 6.0V Micropower CMOS Op Amp | Linear | 4 | Active | The MCP607 dual operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 uA and an offset voltage that is less than 250 µV. The MCP607 uses Microchip's advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP607 operates with a single supply voltage that can be as low as 2.5V, while drawing less than 25 uA of quiescent current per amplifier. The MCP607 is available in standard 8-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for battery and loop-powered applications as well as industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications. AEC-Q100 Grade 1 qualification is available for this device |
MCP6071110 µA, High Precision Op Amps | Amplifiers | 5 | Active | The MCP6071 operational amplifier (op amps)
has a low input offset voltage (±150 µV, maximum) and rail-to-rail input and
output operation. The MCP6071 is unity gain stable and has a gain bandwidth
product of 1.2 MHz (typical). This device operates with a single supply voltage
as low as 1.8V, while drawing low quiescent current per amplifier (110 µA,
typical). These features make the MCP6071 well suited for single-supply, high
precision, battery-powered applications. The MCP6071 is available is SOIC and
2x3 TDFN packages. AEC-Q100 Grade 1 qualification is available for this device |
MCP60711U10 MHz Precision Op Amp with EMI Filtering | Linear | 1 | Active | The MCP6071x family of op amps operate on a power supply voltage between 2.2V and 5.5V, and over the temperature range from -40°C to +125°C. The input offset voltage is trimmed to provide superior performance. On-chip EMI filters provide enhanced protection against electromagnetic interference. |
MCP6072110 µA, High Precision Op Amps | Amplifiers | 1 | Active | The MCP6072 operational amplifier (op amps) has a low input offset voltage (±150 µV, maximum) and rail-to-rail input and output operation. The MCP6072 is unity gain stable and has a gain bandwidth product of 1.2 MHz (typical). This device operates with a single supply voltage as low as 1.8V, while drawing low quiescent current per amplifier (110 µA, typical). These features make the MCP6072 well suited for single-supply, high precision, battery-powered applications. The MCP6072 is available is SOIC and 2x3 TDFN packages. AEC-Q100 Grade 1 qualification is available for this device |
MCP6074110 µA, High Precision Op Amps | Linear | 1 | Active | The MCP6074 operational amplifier (op amps) has a low input offset voltage (±150 µV, maximum) and rail-to-rail input and output operation. The MCP6074 is unity gain stable and has a gain bandwidth product of 1.2 MHz (typical). This device operates with a single supply voltage as low as 1.8V, while drawing low quiescent current per amplifier (110 µA, typical). These features make the MCP6074 well suited for single-supply, high precision, battery-powered applications. The MCP6074 is available is SOIC and TSSOP packages. AEC-Q100 Grade 1 qualification is available for this device |
MCP6082.5V to 6.0V Micropower CMOS Op Amp | Amplifiers | 3 | Active | The MCP608 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 uA and an offset voltage that is less than 250 µV. The MCP608 uses Microchip's advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP608 features a single amplifier with chip select and operates as low as 2.5V, while drawing less than 25 uA of quiescent current. The MCP608 is available in standard 8-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for battery and loop-powered applications as well as industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications. AEC-Q100 Grade 1 qualification is available for this device |
MCP6081125 MHz Precision Op Amp with EMI Filtering | Linear | 1 | Active | The MCP6081x family of op amps operate on a power supply voltage between 2.2V and 5.5V, and over the temperature range from -40°C to +125°C. The input offset voltage is trimmed to provide superior performance. On-chip EMI filters provide enhanced protection against electromagnetic interference. |
MCP60811U25 MHz Precision Op Amp with EMI Filtering | Amplifiers | 1 | Active | The MCP6081x family of op amps operate on a power supply voltage between 2.2V and 5.5V, and over the temperature range from -40°C to +125°C. The input offset voltage is trimmed to provide superior performance. On-chip EMI filters provide enhanced protection against electromagnetic interference. |
MCP6092.5V to 6.0V Micropower CMOS Op Amp | Integrated Circuits (ICs) | 4 | Active | The MCP609 quad operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 uA and an offset voltage that is less than 250 µV. The MCP609 uses Microchip's advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP609 operates with a single supply voltage that can be as low as 2.5V, while drawing less than 25 uA of quiescent current per amplifier. The MCP609 is available in standard 14-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for battery and loop-powered applications as well as industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications. AEC-Q100 Grade 1 qualification is available for this device |
MCP6141600 nA, Non-Unity Gain Rail-to-Rail Input/Out | Linear | 10 | Active | The MCP6141 is a single 600 nA op amp offering rail-to-rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100 kHz with a maximum quiescent current of 1 microampere. |
