| Integrated Circuits (ICs) | 3 | Active | |
| Integrated Circuits (ICs) | 1 | Obsolete | |
| Interface | 1 | Obsolete | |
| Controllers | 2 | Active | |
PM5450HyPHY-20Gflex OTN Processor | Controllers | 1 | Active | The PM5450 HyPHY-20Gflex family of device represents Microchip’s 2nd generation of OTN-enabled, high-capacity system-on-a-chip solutions for Multi-Service Provisioning Platforms (MSPPs), Wavelength Division Multi-plexing (WDM) Platforms, Reconfigurable Optical Add-Drop Multiplexers (ROADMs), Optical Transport Platforms (OTPs), Packet-OTPs and Optical Access Platforms. The HyPHY-20Gflex brings ODU0 and ODUflex capabilities to universal multi-rate, multiservice line, transponder and muxponder cards.
The HyPHY-20Gflex is pin-compatible to the PM5420 HyPHY-20G and delivers unprecedented single-chip scalability and feature integration to enable optimal footprint, power and cost efficiency. The HyPHY-20Gflex provides a rich set of framing, mapping and multiplexing resources for a variety of protocols, including OTN, SONET/SDH, Ethernet, Fibre Channel, ESCON, FICON and multi-rate bit transparent services such as video.
The HyPHY-20Gflex is hardware and software compatible to the lower capacity variant PM5451 HyPHY-10Gflex.
**Applications**
• Universal line cards for MSPPs and OTPs
• Single-chip optical access platforms
• Transponder, Muxponder and MSPP-on-a-wavelength cards for ROADMs
• Ported or portless packet/TDM interworking server cards
• Multi-Service aggregation cards for switches and routers |
PM5451HyPHY-AXS OTN Processor for CPE/Muxponders | Interface | 1 | Active | The PM5451 HyPHY-AXS is an OTN access platform on a chip that enables a new class of compact transport solutions for the Metro Access network. It is optimized for the backhaul of xPON OLTs, 3G/LTE mobile base stations and Enterprise Ethernet services over a unified Metro OTN infrastructure. By integrating multi-rate, multi-protocol client interfaces, Ethernet MACs with onboard support for PTP/SyncE and OTN framing, mapping and multiplexing, the HyPHY-AXS enables compact metro access platforms with the highest level of feature-integration at an optimal footprint, power and Bills-of-Material (BOM) cost.
The HyPHY-AXS supports a rich set of OTN framing, mapping and multiplexing resources for a variety of client protocols, including OTN, SONET/SDH, Ethernet, Fibre Channel, ESCON, FICON and multi-rate bit transparent services such as video. It provides a simple path towards extending designs to enable support for higher client port densities and fabric-connected applications using the PM5450 HyPHY-20Gflex OTN processor.
**Applications**
• Compact metro access platforms
• Universal Muxponder/ADM cards for OTPs and ROADMs |
PM5456HyPHY-10Gflex OTN Processor | Interface | 1 | Active | The PM5456 HyPHY-10Gflex device represents Microchip’s 2nd generation of OTN-enabled, high-capacity system-on-a-chip solutions for Multi-Service Provisioning Platforms (MSPPs), Wavelength Division Multiplexing (WDM) Platforms, Reconfigurable Optical Add-Drop Multiplexers (ROADMs), Optical Transport Platforms (OTPs), Packet-OTPs, and Optical Access Platforms. The HyPHY10Gflex brings ODU0 and ODUflex capabilities to universal multi-rate, multiservice line, transponder, and muxponder cards.
The HyPHY-10Gflex is pin-compatible to the PM5426 HyPHY-10G and delivers unprecedented single-chip scalability and feature integration to enable optimal footprint, power, and cost efficiency. The HyPHY-10Gflex provides a rich set of framing, mapping and multiplexing resources for a variety of protocols, including OTN, SONET/SDH, Ethernet, Fibre Channel, ESCON, FICON, and multi-rate bit transparent services such as video.
Applications
• Universal line cards for MSPPs and OTPs
• Single-chip optical access platforms
• Transponder, Muxponder and MSPP-on-a-wavelength cards for ROADMs
• Ported or portless packet/TDM interworking server cards
• Multi-Service aggregation cards for switches and routers
• WAN network cards for OLTs and DSLAMs |
PM5980DIGI-100GX OTN Processor with Encryption | Embedded | 1 | Active | The PM5980 DIGI-100GX is a member of Microchip's fourth-generation family of OTN processing solutions for next-generation OTN switching and packet-optical transport (POTP / P-OTN), WDM / ROADM, and hyperscale data center interconnect (DCI) equipment. Building on the innovations in Microchip's DIGI-120G, which is widely deployed in service provider and hyperscale data center WAN networks today, the DIGI-100GX is a high-density, multi-service 100G OTN processor that addresses the requirements of SDN-ready, encrypted optical transport infrastructure. Reusing Microchip's proven, service provider-qualified DIGI family OTN switching software development kit (SDK), DIGI-100GX can be leveraged across multiple applications and equipment platforms, providing OEMs with the lowest risk, fastest time-to-market and lowest cost of development.
Variants available with OTN encryption (PM5980) and without OTN encryption (PM5981).
**Benefits for Service Providers & OEMs:**
• Lowers CAPEX & OPEX of service provider 100G deployments
• High-capacity hybrid packet/OTN switching & aggregation maximizes 100G wavelength utilization
• Universal line card solution simplifies line card inventory management
• Supports emerging hyperscale data center interconnect transport requirements
• Flexible, low latency, protocol agnostic AES-256 certified Layer 1 OTN payload encryption
• Flexible on-chip OTN switch & Interlaken interconnects enable design of compact, scalable, ‘rack-and-stack’ data center interconnect WAN transport platforms
• Supports transition to transport SDN-based network architectures
• Flexible hybrid packet/OTN mapping, aggregation & switching enables virtualization of 100G optical infrastructure
• Hitless, on-demand scaling of optical connections
• Features to enable OpenFlow extensions such as network element neighbor discovery
• Accelerates time-to-market & lowers development costs for OEMs
• High-performance, field-proven OTN-SDK built upon the DIGI family code base, allowing OEMs to reuse existing software investments
• ‘Application-centric’ APIs reduce time-to-market by up to 6 months.
• Optimizes power, footprint and cost of line cards:
• Integrated 100G gearbox for direct connect to CFP2, CFP4 and QSFP28 transceivers.
• Connects directly to many off-the-shelf Network Processors & Switch Fabrics
• Integrated PLLs & GCC processor reduces the need for auxiliary components |
| Controllers | 1 | Obsolete | |
PM5985PM5985: META-120GX OTN Wrap wo | Integrated Circuits (ICs) | 1 | Active | The PM5985 META-120GX is part of Microchip's family of Router PHY devices that enable high density Ethernet and OTN line cards on routers, carrier Ethernet switches and packet-optical transport equipment. By providing converged OTN and Ethernet interfaces in 12x 10G, 3x 40G or 1x 100G configurations, the META-120GX delivers a single-chip solution that OEMs can use for multiple applications.
The META-120GX delivers the rich set of mapping options required by carrier router and switch line cards. It supports GFP packet traffic mapping, including Ethernet and IP/MPLS into OTN, and transparent Ethernet mapping using GMP or BMP as specified in G.709. All 10G ports support mapping 10GE traffic into OTU2 in accordance with G.709/G.Sup43. Integrated 10G/40G/100G Ethernet MAC/PCS provide standards-compatible, rich performance monitoring.
Designed for leading edge carrier routing and switching solutions, the META-120GX provides OEMs with industry-leading carrier Ethernet functions. In addition to 802.3ah Link OAM, the device supports packet-based timing distribution via Synchronous Ethernet and IEEE 1588v2 Precision Timing Protocol. This enables carriers to deliver the performance required for packetbased wireless backhaul infrastructure.
Variants available with OTN encryption (PM5984) and without OTN encryption (PM5985). |
