CC430F5135 Series

16-Bit ultra-low-power CC430 Sub 1 GHz wireless MCU with 12-Bit ADC, 16kB Flash and 2kB RAM

Catalog

16-Bit ultra-low-power CC430 Sub 1 GHz wireless MCU with 12-Bit ADC, 16kB Flash and 2kB RAM

Part	Modulation	Voltage - Supply [Max]	Voltage - Supply [Min]	Current - Receiving [Max]	Current - Receiving [Min]	Current - Transmitting [Min]	Current - Transmitting [Max]	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	Sensitivity	RF Family/Standard	Frequency [Max]	Frequency [Min]	Data Rate (Max)	Type	Package / Case	Serial Interfaces	Power - Output	Memory Size [custom]	Memory Size [custom]	GPIO	Mounting Type
Texas Instruments CC430F5135IRGZ	2FSK 2GFSK ASK MSK OOK	3.6 V	2 V	18.5 mA	15 mA	15 mA	36 mA	48-VQFN (7x7)	85 °C	-40 °C	-117 dBm	General ISM < 1GHz	348 MHz 464 MHz 928 MHz	300 MHz 389 MHz 779 MHz	500 kBaud	TxRx + MCU	48-VFQFN Exposed Pad	I2C IrDA JTAG SPI UART	13 dBm	16 kB	2 kB	30	Surface Mount
Texas Instruments CC430F5135IRGZR	2FSK 2GFSK ASK MSK OOK	3.6 V	2 V	18.5 mA	15 mA	15 mA	36 mA	48-VQFN (7x7)	85 °C	-40 °C	-117 dBm	General ISM < 1GHz	348 MHz 464 MHz 928 MHz	300 MHz 389 MHz 779 MHz	500 kBaud	TxRx + MCU	48-VFQFN Exposed Pad	I2C IrDA JTAG SPI UART	13 dBm	16 kB	2 kB	30	Surface Mount

Catalog

16-Bit ultra-low-power CC430 Sub 1 GHz wireless MCU with 12-Bit ADC, 16kB Flash and 2kB RAM

Key Features

• True System-on-Chip (SoC) for Low-Power Wireless Communication ApplicationsWide Supply Voltage Range:3.6 V Down to 1.8 VUltra-Low Power ConsumptionCPU Active Mode (AM): 160 µA/MHzStandby Mode (LPM3 RTC Mode): 2.0 µAOff Mode (LPM4 RAM Retention): 1.0 µARadio in RX: 15 mA, 250 kbps, 915 MHzMSP430™ System and Peripherals16-Bit RISC Architecture, Extended Memory, up to 20-MHz System ClockWake up From Standby Mode in Less Than 6 µsFlexible Power-Management System With SVS and BrownoutUnified Clock System With FLL16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers16-Bit Timer TA1, Timer_A With Three Capture/Compare RegistersHardware Real-Time Clock (RTC)Two Universal Serial Communication Interfaces (USCIs)USCI_A0 Supports UART, IrDA, SPIUSCI_B0 Supports I2C, SPI12-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan Features (CC430F613x and CC430F513x Only)ComparatorIntegrated LCD Driver With Contrast Control for up to 96 Segments (Only CC430F61xx)128-Bit AES Security Encryption and Decryption Coprocessor32-Bit Hardware Multiplier3-Channel Internal DMASerial Onboard Programming, No External Programming Voltage NeededEmbedded Emulation Module (EEM)High-Performance Sub-1 GHz RF Transceiver CoreSame as in CC1101Wide Supply Voltage Range: 2 V to 3.6 VFrequency Bands: 300 MHz to 348 MHz, 389 MHz to 464 MHz, and 779 MHz to 928 MHzProgrammable Data Rate From 0.6 kBaud to 500 kBaudHigh Sensitivity (–117 dBm at 0.6 kBaud, –111 dBm at 1.2 kBaud, 315 MHz, 1% Packet Error Rate)Excellent Receiver Selectivity and Blocking PerformanceProgrammable Output Power up to +12 dBm for All Supported Frequencies2-FSK, 2-GFSK, and MSK Supported, Also OOK and Flexible ASK ShapingFlexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word Detection, Address Check, Flexible Packet Length, and Automatic CRC HandlingSupport for Automatic Clear Channel Assessment (CCA) Before Transmitting (for Listen-Before-Talk Systems)Digital RSSI OutputSuited for Systems Targeting Compliance With EN 300 220 (Europe) and FCC CFR Part 15 (US)Suited for Systems Targeting Compliance With Wireless M-Bus Standard EN 13757‑4:2005Support for Asynchronous and Synchronous Serial Receive or Transmit Mode for Backward Compatibility With Existing Radio Communication ProtocolsDevice Comparison Summarizes the Available Family MembersTrue System-on-Chip (SoC) for Low-Power Wireless Communication ApplicationsWide Supply Voltage Range:3.6 V Down to 1.8 VUltra-Low Power ConsumptionCPU Active Mode (AM): 160 µA/MHzStandby Mode (LPM3 RTC Mode): 2.0 µAOff Mode (LPM4 RAM Retention): 1.0 µARadio in RX: 15 mA, 250 kbps, 915 MHzMSP430™ System and Peripherals16-Bit RISC Architecture, Extended Memory, up to 20-MHz System ClockWake up From Standby Mode in Less Than 6 µsFlexible Power-Management System With SVS and BrownoutUnified Clock System With FLL16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers16-Bit Timer TA1, Timer_A With Three Capture/Compare RegistersHardware Real-Time Clock (RTC)Two Universal Serial Communication Interfaces (USCIs)USCI_A0 Supports UART, IrDA, SPIUSCI_B0 Supports I2C, SPI12-Bit Analog-to-Digital Converter (ADC) With Internal Reference, Sample-and-Hold, and Autoscan Features (CC430F613x and CC430F513x Only)ComparatorIntegrated LCD Driver With Contrast Control for up to 96 Segments (Only CC430F61xx)128-Bit AES Security Encryption and Decryption Coprocessor32-Bit Hardware Multiplier3-Channel Internal DMASerial Onboard Programming, No External Programming Voltage NeededEmbedded Emulation Module (EEM)High-Performance Sub-1 GHz RF Transceiver CoreSame as in CC1101Wide Supply Voltage Range: 2 V to 3.6 VFrequency Bands: 300 MHz to 348 MHz, 389 MHz to 464 MHz, and 779 MHz to 928 MHzProgrammable Data Rate From 0.6 kBaud to 500 kBaudHigh Sensitivity (–117 dBm at 0.6 kBaud, –111 dBm at 1.2 kBaud, 315 MHz, 1% Packet Error Rate)Excellent Receiver Selectivity and Blocking PerformanceProgrammable Output Power up to +12 dBm for All Supported Frequencies2-FSK, 2-GFSK, and MSK Supported, Also OOK and Flexible ASK ShapingFlexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word Detection, Address Check, Flexible Packet Length, and Automatic CRC HandlingSupport for Automatic Clear Channel Assessment (CCA) Before Transmitting (for Listen-Before-Talk Systems)Digital RSSI OutputSuited for Systems Targeting Compliance With EN 300 220 (Europe) and FCC CFR Part 15 (US)Suited for Systems Targeting Compliance With Wireless M-Bus Standard EN 13757‑4:2005Support for Asynchronous and Synchronous Serial Receive or Transmit Mode for Backward Compatibility With Existing Radio Communication ProtocolsDevice Comparison Summarizes the Available Family Members

Description

The TI CC430 family of ultra-low-power system-on-chip (SoC) microcontrollers with integrated RF transceiver cores consists of several devices that feature different sets of peripherals targeted for a wide range of applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The devices feature the powerful MSP430 16‑bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The CC430 family provides a tight integration between the microcontroller core, its peripherals, software, and the RF transceiver, making these true SoC solutions easy to use as well as improving performance. The CC430F61xx series are microcontroller SoC configurations that combine the excellent performance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high-performance 12-bit ADC with eight external inputs plus internal temperature and battery sensors on CC430F613x devices, a comparator, USCIs, a 128-bit AES security accelerator, a hardware multiplier, a DMA, an RTC module with alarm capabilities, an LCD driver, and up to 44 I/O pins. The CC430F513x series are microcontroller SoC configurations that combine the excellent performance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high-performance 12-bit ADC with six external inputs plus internal temperature and battery sensors, a comparator, USCIs, a 128-bit AES security accelerator, a hardware multiplier, a DMA, an RTC module with alarm capabilities, and up to 30 I/O pins. For complete module descriptions, see theCC430 Family User’s Guide. The TI CC430 family of ultra-low-power system-on-chip (SoC) microcontrollers with integrated RF transceiver cores consists of several devices that feature different sets of peripherals targeted for a wide range of applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The devices feature the powerful MSP430 16‑bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The CC430 family provides a tight integration between the microcontroller core, its peripherals, software, and the RF transceiver, making these true SoC solutions easy to use as well as improving performance. The CC430F61xx series are microcontroller SoC configurations that combine the excellent performance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high-performance 12-bit ADC with eight external inputs plus internal temperature and battery sensors on CC430F613x devices, a comparator, USCIs, a 128-bit AES security accelerator, a hardware multiplier, a DMA, an RTC module with alarm capabilities, an LCD driver, and up to 44 I/O pins. The CC430F513x series are microcontroller SoC configurations that combine the excellent performance of the state-of-the-art CC1101 sub-1 GHz RF transceiver with the MSP430 CPUXV2, up to 32KB of in-system programmable flash memory, up to 4KB of RAM, two 16-bit timers, a high-performance 12-bit ADC with six external inputs plus internal temperature and battery sensors, a comparator, USCIs, a 128-bit AES security accelerator, a hardware multiplier, a DMA, an RTC module with alarm capabilities, and up to 30 I/O pins. For complete module descriptions, see theCC430 Family User’s Guide.