Catalog
+/-3 A High-Efficiency PWM Power Driver
Key Features
• Operation Reduces Output Filter Size and Costby 50% Compared to DRV591±3-A Maximum Output CurrentLow Supply Voltage Operation: 2.8 V to 5.5 VHigh Efficiency Generates Less HeatOvercurrent and Thermal ProtectionFault Indicators for Overcurrent, Thermal andUndervoltage ConditionsTwo Selectable Switching FrequenciesInternal or External Clock SyncPWM Scheme Optimized for EMI9×9 mm PowerPAD™ Quad Flatpack PackageAPPLICATIONSThermoelectric Cooler (TEC) DriverLaser Diode BiasingPowerPAD is a trademark of Texas InstrumentsOperation Reduces Output Filter Size and Costby 50% Compared to DRV591±3-A Maximum Output CurrentLow Supply Voltage Operation: 2.8 V to 5.5 VHigh Efficiency Generates Less HeatOvercurrent and Thermal ProtectionFault Indicators for Overcurrent, Thermal andUndervoltage ConditionsTwo Selectable Switching FrequenciesInternal or External Clock SyncPWM Scheme Optimized for EMI9×9 mm PowerPAD™ Quad Flatpack PackageAPPLICATIONSThermoelectric Cooler (TEC) DriverLaser Diode BiasingPowerPAD is a trademark of Texas Instruments
Description
AI
The DRV593 and DRV594 are high-efficiency, high-current power amplifiers ideal for driving a wide variety of thermoelectric cooler elements in systems powered from 2.8 V to 5.5 V. The operation of the device requires only one inductor and capacitor for the output filter, saving significant printed-circuit board area. Pulse-width modulation (PWM) operation and low output stage on-resistance significantly decrease power dissipation in the amplifier.
The DRV593 and DRV594 are internally protected against thermal and current overloads. Logic-level fault indicators signal when the junction temperature has reached approximately 128°C to allow for system-level shutdown before the amplifier’s internal thermal shutdown circuitry activates. The fault indicators also signal when an overcurrent event has occurred. If the overcurrent circuitry is tripped, the devices automatically reset (see application information section for more details).
The PWM switching frequency may be set to 500 kHz or 100 kHz depending on system requirements. To eliminate external components, the gain is fixed at 2.3 V/V for the DRV593. For the DRV594, the gain is fixed at 14.5 V/V.
The DRV593 and DRV594 are high-efficiency, high-current power amplifiers ideal for driving a wide variety of thermoelectric cooler elements in systems powered from 2.8 V to 5.5 V. The operation of the device requires only one inductor and capacitor for the output filter, saving significant printed-circuit board area. Pulse-width modulation (PWM) operation and low output stage on-resistance significantly decrease power dissipation in the amplifier.
The DRV593 and DRV594 are internally protected against thermal and current overloads. Logic-level fault indicators signal when the junction temperature has reached approximately 128°C to allow for system-level shutdown before the amplifier’s internal thermal shutdown circuitry activates. The fault indicators also signal when an overcurrent event has occurred. If the overcurrent circuitry is tripped, the devices automatically reset (see application information section for more details).
The PWM switching frequency may be set to 500 kHz or 100 kHz depending on system requirements. To eliminate external components, the gain is fixed at 2.3 V/V for the DRV593. For the DRV594, the gain is fixed at 14.5 V/V.