TPS22971 Series
3.6-V, 3-A, 6.7-mΩ load switch with adj. rise time, power good, and output discharge
Manufacturer: Texas Instruments
Catalog
3.6-V, 3-A, 6.7-mΩ load switch with adj. rise time, power good, and output discharge
Key Features
• Input voltage range (VIN): 0.65 V to 3.6 VOn-resistanceRDS(on)= 6.7 mΩ (typical) at VIN≥ 1.8 VRDS(on)= 7.2 mΩ (typical) at VIN= 1.05 VRDS(on)= 8.9 mΩ (typical) at VIN= 0.65 VMaximum continuous switch current (IMAX): 3 AON state (IQ): 30 µA (typical) at 3.6 VINOFF state (ISD): 1 µA (typical) at 3.6 VINAdjustable slew rate through CT pinFast turn-ON ≤ 65 µs at VIN= 1 VPower good (PG) indicator after switch turn ONLow threshold enable (ON) of 0.9 V (VIH) supports use of low voltage control logicThermal shutdown (TSD)Quick output discharge (QOD): 150-Ω (typical)Input voltage range (VIN): 0.65 V to 3.6 VOn-resistanceRDS(on)= 6.7 mΩ (typical) at VIN≥ 1.8 VRDS(on)= 7.2 mΩ (typical) at VIN= 1.05 VRDS(on)= 8.9 mΩ (typical) at VIN= 0.65 VMaximum continuous switch current (IMAX): 3 AON state (IQ): 30 µA (typical) at 3.6 VINOFF state (ISD): 1 µA (typical) at 3.6 VINAdjustable slew rate through CT pinFast turn-ON ≤ 65 µs at VIN= 1 VPower good (PG) indicator after switch turn ONLow threshold enable (ON) of 0.9 V (VIH) supports use of low voltage control logicThermal shutdown (TSD)Quick output discharge (QOD): 150-Ω (typical)
Description
AI
The TPS22971 is a space-saving single-channel load switch with controlled and adjustable turn-on slew rate and an integrated power good indicator. the device contains an n-channel mosfet that can operate over a low input voltage range of 0.65 v to 3.6 V and can support a maximum continuous current of 3 A. A low on-resistance of 6.7-mΩ minimizes the power loss and voltage drop across the load switch. The switch is controlled by an on and off input (ON), which is capable of interfacing directly with low-voltage control signals.
By default, the TPS22971 has a fast turn-on time to minimize system startup and wait time. The adjustable slew rate can also be reduced to limit inrush current. A power good (PG) signal internally monitors the gate threshold and indicates when the switch is fully on. When the switch is disabled, a 150-Ω on-chip resistor quickly discharges the output to ground and keeps it from floating.
The TPS22971 is available in an ultra-small, space saving 8-pin WCSP package and is characterized for operation over the free-air temperature range of –40°C to 105°C and integrates thermal shutdown to turn off in case of overheating.
The TPS22971 is a space-saving single-channel load switch with controlled and adjustable turn-on slew rate and an integrated power good indicator. the device contains an n-channel mosfet that can operate over a low input voltage range of 0.65 v to 3.6 V and can support a maximum continuous current of 3 A. A low on-resistance of 6.7-mΩ minimizes the power loss and voltage drop across the load switch. The switch is controlled by an on and off input (ON), which is capable of interfacing directly with low-voltage control signals.
By default, the TPS22971 has a fast turn-on time to minimize system startup and wait time. The adjustable slew rate can also be reduced to limit inrush current. A power good (PG) signal internally monitors the gate threshold and indicates when the switch is fully on. When the switch is disabled, a 150-Ω on-chip resistor quickly discharges the output to ground and keeps it from floating.
The TPS22971 is available in an ultra-small, space saving 8-pin WCSP package and is characterized for operation over the free-air temperature range of –40°C to 105°C and integrates thermal shutdown to turn off in case of overheating.
