ADS54T01 Series

1-ch 750MSPS BTS Feedback and Receiver IC

Catalog

1-ch 750MSPS BTS Feedback and Receiver IC

Part	Number of Bits	Reference Type	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Configuration	Data Interface	Voltage - Supply, Analog [Min]	Voltage - Supply, Analog [Max]	Package / Case	Sampling Rate (Per Second)	Operating Temperature [Max]	Operating Temperature [Min]	Number of A/D Converters	Architecture	Number of Inputs	Input Type	Mounting Type	Ratio - S/H:ADC
Texas Instruments ADS54T01IZAYR	12 bits	Internal	1.7 V	1.9 V	S/H-ADC	LVDS - Parallel	1.7 V 3.15 V	1.9 V 3.45 V	196-LFBGA	750 M	85 °C	-40 °C	1	Pipelined	1	Differential	Surface Mount	1:1

Catalog

1-ch 750MSPS BTS Feedback and Receiver IC

Key Features

• Single channel12-bit resolutionMaximum clock rate: 750 MspsLow swing fullscale input: 1.0 VppAnalog input buffer with high impedance inputInput bandwidth (3 dB): > 1.2 GHzData output interface: DDR LVDS196-Pin NFBGA package (12 mm × 12 mm)Power dissipation: 1.2 WPerformance at fin= 230 MHz IFSNR: 60.7 dBFSSFDR: 73 dBcPerformance at fin= 700 MHz IFSNR: 58.6 dBFSSFDR: 64 dBcReceive mode: 2x decimation with low-pass or high-pass filterFeedback mode: burst mode output for full bandwidth DPD feedbackSingle channel12-bit resolutionMaximum clock rate: 750 MspsLow swing fullscale input: 1.0 VppAnalog input buffer with high impedance inputInput bandwidth (3 dB): > 1.2 GHzData output interface: DDR LVDS196-Pin NFBGA package (12 mm × 12 mm)Power dissipation: 1.2 WPerformance at fin= 230 MHz IFSNR: 60.7 dBFSSFDR: 73 dBcPerformance at fin= 700 MHz IFSNR: 58.6 dBFSSFDR: 64 dBcReceive mode: 2x decimation with low-pass or high-pass filterFeedback mode: burst mode output for full bandwidth DPD feedback

Description

The ADS54T01 is a high linearity, single channel, 12-bit, 750-Msps analog-to-digital converter (ADC) easing front end filter design for wide bandwidth receivers. The analog input buffer isolates the internal switching of the on-chip track-and-hold from disturbing the signal source as well as providing a high-impedance input. Two output modes are available for the output data—the data can be decimated by two or the data can be output in burst mode. The burst mode output is designed specifically for DPD feedback applications where high-resolution output data is available for a short period of time. Designed for high SFDR, the ADC has low-noise performance and outstanding spurious-free dynamic range over a large input-frequency range. The device is available in a 196-pin NFBGA package and is specified over the full industrial temperature range (–40°C to 85°C). The ADS54T01 is a high linearity, single channel, 12-bit, 750-Msps analog-to-digital converter (ADC) easing front end filter design for wide bandwidth receivers. The analog input buffer isolates the internal switching of the on-chip track-and-hold from disturbing the signal source as well as providing a high-impedance input. Two output modes are available for the output data—the data can be decimated by two or the data can be output in burst mode. The burst mode output is designed specifically for DPD feedback applications where high-resolution output data is available for a short period of time. Designed for high SFDR, the ADC has low-noise performance and outstanding spurious-free dynamic range over a large input-frequency range. The device is available in a 196-pin NFBGA package and is specified over the full industrial temperature range (–40°C to 85°C).