MC74HC4851A Series

Analog Multiplexer/Demultiplexer (Mux/Demux) with Injection Current Effect Control

Catalog

Analog Multiplexer/Demultiplexer (Mux/Demux) with Injection Current Effect Control

Part	Package / Case [x]	Package / Case	Package / Case [y]	Supplier Device Package	On-State Resistance (Max) [Max]	Channel Capacitance (CS(off), CD(off)) [custom]	Channel Capacitance (CS(off), CD(off)) [custom]	Number of Circuits	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply, Single (V+) [Min]	Voltage - Supply, Single (V+) [Max]	Current - Leakage (IS(off)) (Max) [Max]	Multiplexer/Demultiplexer Circuit	Switch Circuit	Channel-to-Channel Matching (ΔRon)	Package / Case	Package / Case
ON Semiconductor MC74HC4851ADTR2	0.173 in	16-TSSOP	4.4 mm	16-TSSOP	400 Ohm	40 pF	40 pF	1	Surface Mount	125 °C	-55 °C	2 V	6 V	100 nA	8:1
ON Semiconductor MC74HC4851AMN1TWG-Q
ON Semiconductor MC74HC4851ADR2G-Q	0.154 in	16-SOIC	3.9 mm	16-SOIC	400 Ohm	10 pF	40 pF	1	Surface Mount	125 °C	-55 °C	2 V	6 V	100 nA	8:1	SP8T - Open/Closed	60 Ohm
ON Semiconductor MC74HC4851ANG		16-DIP		16-PDIP	400 Ohm	40 pF	40 pF	1	Through Hole	125 °C	-55 °C	2 V	6 V	100 nA	8:1			0.3 in	7.62 mm
ON Semiconductor MC74HC4851AN		16-DIP		16-PDIP	400 Ohm	40 pF	40 pF	1	Through Hole	125 °C	-55 °C	2 V	6 V	100 nA	8:1			0.3 in	7.62 mm
ON Semiconductor MC74HC4851ADR2G	0.154 in	16-SOIC	3.9 mm	16-SOIC	400 Ohm	40 pF	40 pF	1	Surface Mount	125 °C	-55 °C	2 V	6 V	100 nA	8:1
ON Semiconductor MC74HC4851ADTR2G	0.173 in	16-TSSOP	4.4 mm	16-TSSOP	400 Ohm	40 pF	40 pF	1	Surface Mount	125 °C	-55 °C	2 V	6 V	100 nA	8:1

Catalog

Analog Multiplexer/Demultiplexer (Mux/Demux) with Injection Current Effect Control

Key Features

• Injection Current Cross-Coupling Less than 1mV/mA (See Figure 9)

• Pin Compatible to HC405X and MC1405XB Devices

• Power Supply Range (VCC- GND) = 2.0 to 6.0 V

• In Compliance With the Requirements of JEDEC Standard No. 7A

• Chip Complexity: 154 FETs or 36 Equivalent Gates

• Pb-Free Packages are Available*

Description

Automotive CustomizedThese devices are pin compatible to standard HC405x and MC1405xB analog mux/demux devices, but feature injection current effect control. This makes them especially suited for usage in automotive applications where voltages in excess of normal logic voltage are common.The injection current effect control allows signals at disabled analog input channels to exceed the supply voltage range without affecting the signal of the enabled analog channel. This eliminates the need for external diode/ resistor networks typically used to keep the analog channel signals within the supply voltage range.The devices utilize low power silicon gate CMOS technology. The Channel Select and Enable inputs are compatible with standard CMOS outputs.