FSB50825BS Series

Intelligent Power Module (IPM), 250V, 3.6A

Catalog

Intelligent Power Module (IPM), 250V, 3.6A

Part	Configuration	Current	Mounting Type	Voltage - Isolation	Package / Case [y]	Package / Case	Package / Case [x]	Type
ON Semiconductor FSB50825A	3 Phase	3.6 A	Through Hole	1500 VAC	14 mm	23-PowerDIP Module	0.551 in	MOSFET
ON Semiconductor FSB50825A	3 Phase	3.6 A	Through Hole	1500 VAC	14 mm	23-PowerDIP Module	0.551 in	MOSFET
ON Semiconductor FSB50825TB2	3 Phase	4 A	Through Hole	1500 VAC	19 mm	23-PowerDIP Module	0.748 in	IGBT
ON Semiconductor FSB50825BS	3 Phase Inverter	3.6 A	Surface Mount	1500 VAC		23-PowerSMD Module Gull Wing		MOSFET
ON Semiconductor FSB50825AT	3 Phase Inverter	3.6 A	Through Hole	1500 VAC	19 mm	23-PowerDIP Module	0.748 in	MOSFET
ON Semiconductor FSB50825B	3 Phase Inverter	3.6 A	Through Hole	1500 VAC	14 mm	23-PowerDIP Module	0.551 in	MOSFET

Catalog

Intelligent Power Module (IPM), 250V, 3.6A

Key Features

• UL Certified No. E209204 (UL1557)

• Optimized for Over 10 kHz Switching Frequency

• 250 V RDS(ON) = 0.55 (Max) FRFET MOSFET 3−Phase Inverterwith Gate Drivers and Protection

• Built−In Bootstrap Diodes Simplify PCB Layout

• Separate Open−Source Pins from Low−Side MOSFETs forThree−Phase Current−Sensing

• Active−HIGH Interface, Works with 3.3 / 5 V Logic, Schmitt−triggerInput

• Optimized for Low Electromagnetic Interference

• Moisture Sensitive Level (MSL) 3 for SMD PKG

• RoHS Compliant

• HVIC for Gate Driving and Under−Voltage Protection

• Isolation Rating: 1500 Vrms / min

Description

The FSB50825A/AT is an advanced Motion SPM®5 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC and PMSM motors. These modules integrate optimized gate drive ofthe built-in MOSFETs(FRFET®technology) to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts and thermal monitoring. The built-in high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal MOSFETs. Separate open-source MOSFET terminals are available for each phase to support the widest variety of control algorithms.