TPS7B67-Q1 Series

Automotive 450-mA, off-battery (40-V), high-PSRR, low-IQ, low-dropout voltage regulator with PG

Catalog

Automotive 450-mA, off-battery (40-V), high-PSRR, low-IQ, low-dropout voltage regulator with PG

Part	PSRR [Min]	PSRR [Max]	Number of Regulators	Protection Features	Control Features	Supplier Device Package	Current - Output	Voltage - Output (Max) [Max]	Package / Case	Package / Case [custom]	Package / Case	Voltage Dropout (Max) [Max]	Current - Supply (Max) [Max]	Grade	Voltage - Output (Min/Fixed)	Qualification	Output Configuration	Mounting Type	Output Type	Utilized IC / Part	Channels per IC	Voltage - Input [Min]	Voltage - Input [Max]	Regulator Type	Voltage - Output [Min]	Voltage - Output [Max]	Board Type	Supplied Contents
Texas Instruments TPS7B6701QPWPRQ1	40 dB 100 Hz	60 dB 100 kHz	1	Over Current Over Temperature Short Circuit Under Voltage Lockout (UVLO)	Enable Reset	20-HTSSOP	450 mA	18 V	20-PowerTSSOP	4.4 mm	0.173 in	0.3 V	35 µA	Automotive	1.5 V	AEC-Q100	Positive	Surface Mount	Adjustable
Texas Instruments TPS7B6701EVM							450 mA													TPS7B6701	1 - Single	4 V	40 V	Positive Adjustable	1.5 V	18 V	Fully Populated	Board(s)

Catalog

Automotive 450-mA, off-battery (40-V), high-PSRR, low-IQ, low-dropout voltage regulator with PG

Key Features

• Qualified for Automotive ApplicationsAEC-Q100 Qualified With the Following ResultsDevice Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature RangeDevice HBM ESD Classification Level H2Device CDM ESD Classification Level C3B4-V to 40-V Wide-VINInput-Voltage Range With up to 45-V TransientMaximum Output Current, 450 mALow Quiescent Current (IQ))< 4 µA When EN = Low (Shutdown Mode)15 µA Typical at Light LoadsLow-ESR (0.001 to 20 Ω) Ceramic Output-Stability Capacitor (10 µF to 500 µF When VO≥ 2.5 V, 22 µF to 500 µF when VO= 1.5 V to 2.5 V)Maximum Dropout Voltage 450 mV at 400 mAAdjustable 1.5-V to 18-V Output VoltagesLow-Input Voltage Tracking to UVLOIntegrated Power-On ResetProgrammable-Reset Pulse DelayOpen-Drain Reset OutputIntegrated Fault ProtectionThermal ShutdownShort-Circuit Protection20-Pin HTSSOP PackageQualified for Automotive ApplicationsAEC-Q100 Qualified With the Following ResultsDevice Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature RangeDevice HBM ESD Classification Level H2Device CDM ESD Classification Level C3B4-V to 40-V Wide-VINInput-Voltage Range With up to 45-V TransientMaximum Output Current, 450 mALow Quiescent Current (IQ))< 4 µA When EN = Low (Shutdown Mode)15 µA Typical at Light LoadsLow-ESR (0.001 to 20 Ω) Ceramic Output-Stability Capacitor (10 µF to 500 µF When VO≥ 2.5 V, 22 µF to 500 µF when VO= 1.5 V to 2.5 V)Maximum Dropout Voltage 450 mV at 400 mAAdjustable 1.5-V to 18-V Output VoltagesLow-Input Voltage Tracking to UVLOIntegrated Power-On ResetProgrammable-Reset Pulse DelayOpen-Drain Reset OutputIntegrated Fault ProtectionThermal ShutdownShort-Circuit Protection20-Pin HTSSOP Package

Description

The TPS7B6701-Q1, TPS7B6733-Q1, and TPS7B6750-Q1 devices (TPS7B67xx-Q1) are low-dropout linear regulators designed for up to 40-V VINoperations. With only 15-µA quiescent current at light load that greatly increases the endurance time of the automotive battery, the devices drive loads up to 450 mA. The TPS7B67xx-Q1 family of devices features an integrated short-circuit and overcurrent protection. Reset delay and power-good signal are implemented on power-up to indicate that the output voltage is stable and is in regulation. An external capacitor programs the delay. The enable function activates and deactivates the device with an I/O port from the MCU. The device family operates at a temperature range of –40°C to 125°C. The TPS7B6701-Q1, TPS7B6733-Q1, and TPS7B6750-Q1 devices (TPS7B67xx-Q1) are low-dropout linear regulators designed for up to 40-V VINoperations. With only 15-µA quiescent current at light load that greatly increases the endurance time of the automotive battery, the devices drive loads up to 450 mA. The TPS7B67xx-Q1 family of devices features an integrated short-circuit and overcurrent protection. Reset delay and power-good signal are implemented on power-up to indicate that the output voltage is stable and is in regulation. An external capacitor programs the delay. The enable function activates and deactivates the device with an I/O port from the MCU. The device family operates at a temperature range of –40°C to 125°C.