Catalog
USB/AC Adaptor, single cell Li-ion battery charger IC
Key Features
• Supports USB Charging SchemeIntegrated Pass TransistorNear-Depleted Battery PreconditioningMonitors Battery TemperatureBuilt-In 5.6 Hour TimerUnder Voltage and Over Voltage LockoutCharge Status IndicatorsCharge Current Monitor Analog OutputLDO Mode Operation can source 1 AmpContinuous Over Current/Temperature ProtectionKey Specifications1% Charger Voltage Accuracy Over0°C ≤ TJ≤ 85°C4.3V to 6V Input Voltage Range100 mA to 750 mA Charge Current Range, in Charger Mode100 mA to 500 mA Charge Current Range, in USB ModeWSON Package Power Dissipation:2.7W at TA= 25°CAll trademarks are the property of their respective owners.Supports USB Charging SchemeIntegrated Pass TransistorNear-Depleted Battery PreconditioningMonitors Battery TemperatureBuilt-In 5.6 Hour TimerUnder Voltage and Over Voltage LockoutCharge Status IndicatorsCharge Current Monitor Analog OutputLDO Mode Operation can source 1 AmpContinuous Over Current/Temperature ProtectionKey Specifications1% Charger Voltage Accuracy Over0°C ≤ TJ≤ 85°C4.3V to 6V Input Voltage Range100 mA to 750 mA Charge Current Range, in Charger Mode100 mA to 500 mA Charge Current Range, in USB ModeWSON Package Power Dissipation:2.7W at TA= 25°CAll trademarks are the property of their respective owners.
Description
AI
The LP3947 is a complete charge management system that safely charges and maintains a Li-Ion battery from either USB power source or AC adaptor. In USB mode, the LP3947 supports charging in low power or high power mode. Alternatively, the LP3947 can take charge from AC adaptor. In both USB and AC adaptor modes, charge current, battery regulation voltage, and End of Charge (EOC) point can be selected via I2C interface. The LP3947 can also operate on default values that are pre-programmed in the factory. The battery temperature is monitored continuously at the Ts pin to safeguard against hazardous charging conditions. The charger also has under-voltage and over-voltage protection as well as an internal 5.6 hr timer to protect the battery. The pass transistor and charge current sensing resistor are all integrated inside the LP3947.
The LP3947 operates in four modes: pre-qualification, constant current, constant voltage and maintenance modes. There are two open drain outputs for status indication. An internal amplifier readily converts the charge current into a voltage. Also, the charger can operate in an LDO mode providing a maximum of 1.2 Amp to the load.
The LP3947 is a complete charge management system that safely charges and maintains a Li-Ion battery from either USB power source or AC adaptor. In USB mode, the LP3947 supports charging in low power or high power mode. Alternatively, the LP3947 can take charge from AC adaptor. In both USB and AC adaptor modes, charge current, battery regulation voltage, and End of Charge (EOC) point can be selected via I2C interface. The LP3947 can also operate on default values that are pre-programmed in the factory. The battery temperature is monitored continuously at the Ts pin to safeguard against hazardous charging conditions. The charger also has under-voltage and over-voltage protection as well as an internal 5.6 hr timer to protect the battery. The pass transistor and charge current sensing resistor are all integrated inside the LP3947.
The LP3947 operates in four modes: pre-qualification, constant current, constant voltage and maintenance modes. There are two open drain outputs for status indication. An internal amplifier readily converts the charge current into a voltage. Also, the charger can operate in an LDO mode providing a maximum of 1.2 Amp to the load.
