NCV8711 Series

LDO Regulator, 100 mA, 18 V, 1 uA IQ, with PG

Catalog

LDO Regulator, 100 mA, 18 V, 1 uA IQ, with PG

Part	Mounting Type	Control Features	Current - Output	Current - Quiescent (Iq)	Voltage - Output (Min/Fixed)	PSRR [Max]	PSRR [Min]	Voltage - Input (Max) [Max]	Output Configuration	Supplier Device Package	Protection Features	Grade	Number of Regulators	Output Type	Qualification	Voltage Dropout (Max) [Max]	Operating Temperature
ON Semiconductor NCV8711BMTW500TBG	Surface Mount Wettable Flank	Current Limit Enable Power Good Soft Start	100 mA	2.5 µA	5 V	80 dB	48 dB	18 V	Positive	6-WDFNW (2x2)	Over Current Over Temperature	Automotive	1	1.81 mOhm	AEC-Q100	0.355 V	150 °C
ON Semiconductor NCV8711BMTW300TBG	Surface Mount Wettable Flank	Current Limit Enable Power Good Soft Start	100 mA	2.5 µA		80 dB	48 dB	18 V	Positive	6-WDFNW (2x2)	Over Current Over Temperature	Automotive	1	1.81 mOhm	AEC-Q100	0.355 V	150 °C
ON Semiconductor NCV8711BMTW330TBG	Surface Mount Wettable Flank	Current Limit Enable Power Good Soft Start	100 mA	2.5 µA	3.3 V	80 dB	48 dB	18 V	Positive	6-WDFNW (2x2)	Over Current Over Temperature	Automotive	1	1.81 mOhm	AEC-Q100	0.355 V	150 °C

Catalog

LDO Regulator, 100 mA, 18 V, 1 uA IQ, with PG

Key Features

• Operating Input Voltage Range: 2.7 V to 18 V

• Output Voltage: 1.2 V to 17 V

• Capable of Sourcing 140 mA Peak Output Current

• Low Shutdown Current: 100 nA typ.

• Very Low Quiescent Current: 1 uA typ.

• Low Dropout: 215 mV typ. at 100 mA

• Output Voltage Accuracy ±1%

• Power Good Output (Version B)

• Stable with Small 1 uF Ceramic Capacitors

• Built−in Soft Start Circuit

Description

The NCV8711 device is based on unique combination of features −very low quiescent current, fast transient response and high input andoutput voltage ranges. The NCV8711 is CMOS LDO regulatordesigned for up to 18 V input voltage and 100 mA output current.Quiescent current of only 1 uA makes this device ideal solution forbattery-powered, always-on systems. Several fixed output voltageversions are available as well as the adjustable version.The device (version B) implements power good circuit (PG) whichindicates that output voltage is in regulation. This signal could be usedfor power sequencing or as a microcontroller reset.Internal short circuit and over temperature protections saves thedevice against overload conditions.