NCP1129 Series

High Voltage Switching Regulator for Offline SMPS

Catalog

High Voltage Switching Regulator for Offline SMPS

Part	Duty Cycle	Topology	Voltage - Supply (Vcc/Vdd) [Max]	Voltage - Supply (Vcc/Vdd) [Min]	Power (Watts)	Voltage - Breakdown	Package / Case	Package / Case	Package / Case	Supplier Device Package	Fault Protection	Operating Temperature [Max]	Operating Temperature [Min]	Output Isolation	Voltage - Start Up	Frequency - Switching	Mounting Type
ON Semiconductor NCP1129AP100G	80 %	Flyback	35 V	8.8 V	43 W	650 V	7.62 mm	0.3 in 7 Leads	8-DIP	7-PDIP	Over Load Over Temperature Over Voltage Short Circuit	150 °C	-40 °C	Isolated	17 V	100 kHz	Through Hole
ON Semiconductor NCP1129BP100G	80 %	Flyback	35 V	8.8 V	43 W	650 V	7.62 mm	0.3 in 7 Leads	8-DIP	7-PDIP	Over Load Over Temperature Over Voltage Short Circuit	150 °C	-40 °C	Isolated	17 V	100 kHz	Through Hole
ON Semiconductor NCP1129AP65G	80 %	Flyback	35 V	8.5 V	43 W	650 V	7.62 mm	0.3 in 7 Leads	8-DIP	7-PDIP	Over Load Over Temperature Over Voltage Short Circuit	150 °C	-40 °C	Isolated	17 V	65 kHz	Through Hole

Catalog

High Voltage Switching Regulator for Offline SMPS

Key Features

• 650 V Avalanche Rated MOSFET

• FixedFrequency 65 or 100 kHz CurrentMode Control Operation

• Frequency Foldback Down to 26 kHz and SkipCycle in Light Load Conditions

• Adjustable Current Limit

• 50 ms Timer-Based Auto-Recovery Short-Circuit Protection

• Frequency Jittering in Normal and Frequency Foldback Modes

• Option for Auto-Recovery or Latched Short-Circuit Protection

• Less than 100 mW Standby Power at High Line

Description

The NCP1129 switcher offers everything needed to build reliable and compact AC-DC switching power supplies with minimal surrounding elements. Incorporating an avalanche rated 650 V MOSFET, converters built with the NCP1129 can be safely designed for international conditions without jeopardizing the overall reliability.The NCP1129 implements peak current mode control with adjustable ramp compensation that ensures stability in Continuous Conduction Mode (CCM) operation. With an external resistor, the maximum peak current is adjustable, allowing the designer the ability to inject ramp compensation to stabilize CCM power supplies.A short circuit fault condition is independently detected from the auxiliary winding voltage resulting in improved short circuit protection with true overload detection. The Source pin provides access to the MOSFET source, allowing for overpower compensation.With a supply range up to 26 V, the switcher also provides a jittered 65 kHz or 100 kHz switching frequency operated in peak current mode control. When the power on the secondary side starts to decrease, the switcher automatically folds back its switching frequency down to a minimum level of 26 kHz. As the power further goes down, the part enters skip cycle while limiting the peak current.