LM96080 Series

1 local temp sensor with fan speed and power supply voltage monitor

Catalog

1 local temp sensor with fan speed and power supply voltage monitor

Part	Supplier Device Package	Function	Output Fan	Sensing Temperature	Sensing Temperature [Max]	Sensing Temperature [Min]	Output Alarm	Topology	Output Type	Package / Case	Package / Case	Mounting Type	Sensor Type	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply [Max]	Voltage - Supply [Min]	Accuracy
Texas Instruments LM96080CIMT/NOPB	24-TSSOP	Hardware Monitor		External Sensor	125 °C	-40 °C		ADC (Sigma Delta) Comparator Fan Speed Counter Register Bank	2-Wire Serial I2C	24-TSSOP	0.173 in 4.4 mm	Surface Mount	Internal and External	125 °C	-40 °C	5.5 V	3 V	3 °C

Catalog

1 local temp sensor with fan speed and power supply voltage monitor

Key Features

• Local Temperature Sensing7 Positive Voltage Inputs with 10-bit Resolution2 Programmable Fan Speed Monitoring Inputs2.5 mV LSb and 2.56V Input RangeChassis Intrusion Detector InputWATCHDOG Comparison of All Monitored ValuesSeparate Input to Show Status in Interrupt Status Register of Additional External Temperature Sensors Such as the LM26/27, LM56/57, LM73, or LM75I2C Serial Bus Interface Compatibility, Supports Standard Mode, 100 kbits/s, and Fast Mode, 400 kbits/sShutdown Mode to Minimize Power ConsumptionProgrammableRST_OUT/OSPin:RST_OUTProvides a Reset Output;OSProvides an Interrupt Output Activated by an Overtemperature Shutdown EventSoftware and Pin Compatible with the LM80Key SpecificationsTotal Unadjusted Error ±1 %FS (Max)Differential Non-Linearity ±1 Lsb (Max)Supply Voltage Range +3.0 V to +5.5 VSupply Current (Operating) 0.370 mA TypSupply Current (Shutdown) 0.330 mA TypADC Resolution 10 BitsTemperature Resolution 0.5°C/0.0625°CTemperature Accuracy ±3°C (Max)All trademarks are the property of their respective owners.Local Temperature Sensing7 Positive Voltage Inputs with 10-bit Resolution2 Programmable Fan Speed Monitoring Inputs2.5 mV LSb and 2.56V Input RangeChassis Intrusion Detector InputWATCHDOG Comparison of All Monitored ValuesSeparate Input to Show Status in Interrupt Status Register of Additional External Temperature Sensors Such as the LM26/27, LM56/57, LM73, or LM75I2C Serial Bus Interface Compatibility, Supports Standard Mode, 100 kbits/s, and Fast Mode, 400 kbits/sShutdown Mode to Minimize Power ConsumptionProgrammableRST_OUT/OSPin:RST_OUTProvides a Reset Output;OSProvides an Interrupt Output Activated by an Overtemperature Shutdown EventSoftware and Pin Compatible with the LM80Key SpecificationsTotal Unadjusted Error ±1 %FS (Max)Differential Non-Linearity ±1 Lsb (Max)Supply Voltage Range +3.0 V to +5.5 VSupply Current (Operating) 0.370 mA TypSupply Current (Shutdown) 0.330 mA TypADC Resolution 10 BitsTemperature Resolution 0.5°C/0.0625°CTemperature Accuracy ±3°C (Max)All trademarks are the property of their respective owners.

Description

LM96080, compatible to LM80, is a hardware monitor that contains a 10-bit delta-sigma ADC capable of measuring 7 positive voltages and local temperature. The LM96080 also measures the speed of two fans and includes other hardware monitoring on an I2C® interface. The LM96080 includes a sequencer that performs WATCHDOG window comparisons of all measured values and its interrupt outputs become active when any values exceed the programmed limits. The LM96080 is especially suited to interface to both linear and digital temperature sensors. The 2.5 mV LSb (least significant bit) and 2.56 volt input range is ideal for accepting inputs from a linear sensor such as the LM94022. TheBTIis used as an input from either digital or thermostat sensors such as LM73, LM75, LM56, LM57, LM26, LM27, LM26LV, or other LM96080. The LM96080 supports Standard Mode (Sm, 100 kbits/s) and Fast Mode (Fm, 400 kbits/s) I2C interface modes of operation. LM96080 includes an analog filter on the I2C digital control lines that allows improved noise immunity and supports TIMEOUT reset function on SDA and SCL that prevents I2C bus lockup. Three I2C device address pins allow up to 8 parts on a single bus. The LM96080's 3.0V to 5.5V supply voltage range, low supply current, and I2C interface make it ideal for a wide range of applications. Operation is ensured over the temperature range of (−40)°C ≤ TA≤ +125°C. The LM96080 is available in a 24-pin TSSOP package. LM96080, compatible to LM80, is a hardware monitor that contains a 10-bit delta-sigma ADC capable of measuring 7 positive voltages and local temperature. The LM96080 also measures the speed of two fans and includes other hardware monitoring on an I2C® interface. The LM96080 includes a sequencer that performs WATCHDOG window comparisons of all measured values and its interrupt outputs become active when any values exceed the programmed limits. The LM96080 is especially suited to interface to both linear and digital temperature sensors. The 2.5 mV LSb (least significant bit) and 2.56 volt input range is ideal for accepting inputs from a linear sensor such as the LM94022. TheBTIis used as an input from either digital or thermostat sensors such as LM73, LM75, LM56, LM57, LM26, LM27, LM26LV, or other LM96080. The LM96080 supports Standard Mode (Sm, 100 kbits/s) and Fast Mode (Fm, 400 kbits/s) I2C interface modes of operation. LM96080 includes an analog filter on the I2C digital control lines that allows improved noise immunity and supports TIMEOUT reset function on SDA and SCL that prevents I2C bus lockup. Three I2C device address pins allow up to 8 parts on a single bus. The LM96080's 3.0V to 5.5V supply voltage range, low supply current, and I2C interface make it ideal for a wide range of applications. Operation is ensured over the temperature range of (−40)°C ≤ TA≤ +125°C. The LM96080 is available in a 24-pin TSSOP package.