TL082-Q1 Series

Automotive-grade, dual, 30-V, 3-MHz, 13-V/µs slew rate, In to V+, JFET-input op amp

Catalog

Automotive-grade, dual, 30-V, 3-MHz, 13-V/µs slew rate, In to V+, JFET-input op amp

Part	Gain Bandwidth Product	Voltage - Supply Span (Min) [Min]	Number of Circuits	Package / Case	Package / Case [y]	Package / Case [x]	Amplifier Type	Current - Input Bias	Current - Output / Channel [custom]	Operating Temperature [Max]	Operating Temperature [Min]	Supplier Device Package	Slew Rate	Voltage - Supply Span (Max) [Max]	Voltage - Input Offset	Mounting Type	Package / Case	Package / Case	Current - Output / Channel [custom]	Current - Output / Channel	Current - Supply	Package / Case [custom]	Package / Case [custom]	Qualification	Grade
Texas Instruments TL082IDR	3 MHz	10 V	2	8-SOIC	3.9 mm	0.154 in	J-FET	30 pA	10 mA	85 °C	-40 °C	8-SOIC	13 V/µs	30 V	3 mV	Surface Mount
Texas Instruments TL082BCP	3 MHz	10 V	2	8-DIP			J-FET	30 pA	10 mA	70 °C	0 °C	8-PDIP	13 V/µs	30 V	2 mV	Through Hole	0.3 in	7.62 mm
Texas Instruments TL082ACP	3 MHz	10 V	2	8-DIP			J-FET	30 pA	10 mA	70 °C	0 °C	8-PDIP	13 V/µs	30 V	3 mV	Through Hole	0.3 in	7.62 mm
Texas Instruments TL082CPSRG4	3 MHz	10 V	2	8-SOIC	5.3 mm	0.209 "	J-FET	30 pA	10 mA	70 °C	0 °C	8-SO	13 V/µs	30 V	3 mV	Surface Mount
Texas Instruments TL082IDG4	4 MHz	10 V	2	8-SOIC	3.9 mm	0.154 in	J-FET	30 pA		85 °C	-40 °C	8-SOIC	13 V/µs	30 V	3 mV	Surface Mount			40 mA
Texas Instruments TL082CMX	4 MHz	36 V	2	8-SOIC	3.9 mm	0.154 in	J-FET	50 pA		70 °C	0 °C	8-SOIC	13 V/µs	36 V		Surface Mount				17 mA	3.6 mA
Texas Instruments TL082CP	3 MHz	10 V	2	8-DIP			J-FET	50 pA	10 mA	70 °C	0 °C	8-PDIP	13 V/µs	30 V		Through Hole	0.3 in	7.62 mm
Texas Instruments TL082CPWR	3 MHz	10 V	2	8-TSSOP			J-FET	30 pA	10 mA	70 °C	0 °C	8-TSSOP	13 V/µs	30 V	3 mV	Surface Mount						0.173 "	4.4 mm
Texas Instruments TL082CPW	3 MHz	10 V	2	8-TSSOP			J-FET	30 pA	10 mA	70 °C	0 °C	8-TSSOP	13 V/µs	30 V	3 mV	Surface Mount						0.173 "	4.4 mm
Texas Instruments TL082QDRQ1	3 MHz	7 V	2	8-SOIC	3.9 mm	0.154 in	J-FET	30 pA	10 mA	125 °C	-40 °C	8-SOIC	13 V/µs	36 V	3 mV	Surface Mount								AEC-Q100	Automotive

Catalog

Automotive-grade, dual, 30-V, 3-MHz, 13-V/µs slew rate, In to V+, JFET-input op amp

Key Features

• High slew rate: 20V/µs (TL08xH, typ)Low offset voltage: 1mV (TL08xH, typ)Low offset voltage drift: 2 µV/°CLow power consumption: 940µA/ch (TL08xH, typ)Wide common-mode and differential voltage rangesCommon-mode input voltage range includes VCC+Low input bias and offset currentsLow noise: Vn = 18nV/√Hz (typ) at f = 1kHzOutput short-circuit protectionLow total harmonic distortion: 0.003% (typ)Wide supply voltage: ±2.25V to ±20V, 4.5V to 40VHigh slew rate: 20V/µs (TL08xH, typ)Low offset voltage: 1mV (TL08xH, typ)Low offset voltage drift: 2 µV/°CLow power consumption: 940µA/ch (TL08xH, typ)Wide common-mode and differential voltage rangesCommon-mode input voltage range includes VCC+Low input bias and offset currentsLow noise: Vn = 18nV/√Hz (typ) at f = 1kHzOutput short-circuit protectionLow total harmonic distortion: 0.003% (typ)Wide supply voltage: ±2.25V to ±20V, 4.5V to 40V

Description

These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage (BI-FET II technology). They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The TL082 is pin compatible with the standard LM1558 allowing designers to immediately upgrade the overall performance of existing LM1558 and most LM358 designs. These amplifiers may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth. The devices also exhibit low noise and offset voltage drift. These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage (BI-FET II technology). They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The TL082 is pin compatible with the standard LM1558 allowing designers to immediately upgrade the overall performance of existing LM1558 and most LM358 designs. These amplifiers may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth. The devices also exhibit low noise and offset voltage drift.