SN74LVT162240 Series

16-ch, 2.7-V to 3.6-V inverters with TTL-compatible CMOS inputs and 3-state outputs

Catalog

16-ch, 2.7-V to 3.6-V inverters with TTL-compatible CMOS inputs and 3-state outputs

Part	Number of Bits per Element	Operating Temperature [Max]	Operating Temperature [Min]	Current - Output High, Low [custom]	Current - Output High, Low [custom]	Mounting Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Number of Elements	Logic Type	Output Type	Package / Case [y]	Package / Case	Package / Case [y]	Supplier Device Package	Package / Case	Package / Case [custom]
Texas Instruments SN74LVT162240DLR	4	85 °C	-40 °C	12 mA	12 mA	Surface Mount	2.7 V	3.6 V	4	Buffer Inverting	3-State	0.295 in	48-BSSOP	7.5 mm	48-SSOP
Texas Instruments SN74LVT162240DGVR	4	85 °C	-40 °C	12 mA	12 mA	Surface Mount	2.7 V	3.6 V	4	Buffer Inverting	3-State		48-TFSOP			0.173 in 4.4 mm
Texas Instruments SN74LVT162240DL	4	85 °C	-40 °C	12 mA	12 mA	Surface Mount	2.7 V	3.6 V	4	Buffer Inverting	3-State	0.295 in	48-BSSOP	7.5 mm	48-SSOP
Texas Instruments SN74LVT162240DLG4	4	85 °C	-40 °C	12 mA	12 mA	Surface Mount	2.7 V	3.6 V	4	Buffer Inverting	3-State	0.295 in	48-BSSOP	7.5 mm	48-SSOP
Texas Instruments SN74LVT162240DGGR	4	85 °C	-40 °C	12 mA	12 mA	Surface Mount	2.7 V	3.6 V	4	Buffer Inverting	3-State		48-TFSOP		48-TSSOP	0.24 in	6.1 mm

Catalog

16-ch, 2.7-V to 3.6-V inverters with TTL-compatible CMOS inputs and 3-state outputs

Key Features

• Members of the Texas Instruments Widebus™ FamilyState-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power DissipationOutput Ports Have Equivalent 22-Series Resistors, So No External Resistors Are RequiredSupport Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)Support Unregulated Battery Operation Down to 2.7 VTypical VOLP(Output Ground Bounce) <0.8 V at VCC= 3.3 V, TA= 25°CIoffand Power-Up 3-State Support Hot InsertionDistributed VCCand GND Pins Minimize High-Speed Switching NoiseFlow-Through Architecture Optimizes PCB LayoutLatch-Up Performance Exceeds 100 mA Per JESD 78, Class IIESD Protection Exceeds JESD 222000-V Human-Body Model (A114-A)200-V Machine Model (A115-A)1000-V Charged-Device Model (C101)Package Options Include Plastic Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center SpacingsWidebus is a trademark of Texas Instruments.Members of the Texas Instruments Widebus™ FamilyState-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power DissipationOutput Ports Have Equivalent 22-Series Resistors, So No External Resistors Are RequiredSupport Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)Support Unregulated Battery Operation Down to 2.7 VTypical VOLP(Output Ground Bounce) <0.8 V at VCC= 3.3 V, TA= 25°CIoffand Power-Up 3-State Support Hot InsertionDistributed VCCand GND Pins Minimize High-Speed Switching NoiseFlow-Through Architecture Optimizes PCB LayoutLatch-Up Performance Exceeds 100 mA Per JESD 78, Class IIESD Protection Exceeds JESD 222000-V Human-Body Model (A114-A)200-V Machine Model (A115-A)1000-V Charged-Device Model (C101)Package Options Include Plastic Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center SpacingsWidebus is a trademark of Texas Instruments.

Description

The 'LVT162240 devices are 16-bit buffers/drivers designed specifically for low-voltage (3.3-V) VCCoperation and to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. They have the capability to provide a TTL interface to a 5-V system environment. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer and provide inverting outputs and symmetrical active-low output-enable (OE) inputs. The outputs, which are designed to source or sink up to 12 mA, include equivalent 22-series resistors to reduce overshoot and undershoot. When VCC, is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V,OEshould be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. These devices are fully specified for hot-insertion applications using Ioffand power-up 3-state. The Ioffcircuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict. The SN54LVT162240 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVT162240 is characterized for operation from -40°C to 85°C. The 'LVT162240 devices are 16-bit buffers/drivers designed specifically for low-voltage (3.3-V) VCCoperation and to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. They have the capability to provide a TTL interface to a 5-V system environment. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer and provide inverting outputs and symmetrical active-low output-enable (OE) inputs. The outputs, which are designed to source or sink up to 12 mA, include equivalent 22-series resistors to reduce overshoot and undershoot. When VCC, is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V,OEshould be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. These devices are fully specified for hot-insertion applications using Ioffand power-up 3-state. The Ioffcircuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict. The SN54LVT162240 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVT162240 is characterized for operation from -40°C to 85°C.