Catalog
5-V, 2:1 (SPDT), 4-channel LAN switch
Key Features
• Wide Bandwidth (BW = 300 MHz Min)Low Differential Crosstalk (XTALK= –60 dB Typ)Low Power Consumption (ICC= 3 µA Max)Bidirectional Data Flow, With Near-Zero Propagation DelayLow ON-State Resistance (ron= 3Typ)VCCOperating Range From 6 V to 6.5 VIoffSupports Partial-Power-Down Mode OperationData and Control Inputs Provide Undershoot Clamp DiodeLatch-Up Performance Exceeds 100 mA Per JESD 78, Class IIESD Performance Tested Per JESD 222000-V Human-Body Model (A114-B, Class II)1000-V Charged-Device Model (C101)Suitable for Both 10 Base-T/100 Base-T SignalingWide Bandwidth (BW = 300 MHz Min)Low Differential Crosstalk (XTALK= –60 dB Typ)Low Power Consumption (ICC= 3 µA Max)Bidirectional Data Flow, With Near-Zero Propagation DelayLow ON-State Resistance (ron= 3Typ)VCCOperating Range From 6 V to 6.5 VIoffSupports Partial-Power-Down Mode OperationData and Control Inputs Provide Undershoot Clamp DiodeLatch-Up Performance Exceeds 100 mA Per JESD 78, Class IIESD Performance Tested Per JESD 222000-V Human-Body Model (A114-B, Class II)1000-V Charged-Device Model (C101)Suitable for Both 10 Base-T/100 Base-T Signaling
Description
AI
The TI TS5L100 LAN switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E)\ input. When E\ is low, the switch is enabled and the I port is connected to the Y port. When E\ is high, the switch is disabled and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer.
This device can be used to replace mechanical relays in LAN applications. This device has low ron, wide bandwidth, and low differential crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN applications.
This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, E\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The TI TS5L100 LAN switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E)\ input. When E\ is low, the switch is enabled and the I port is connected to the Y port. When E\ is high, the switch is disabled and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer.
This device can be used to replace mechanical relays in LAN applications. This device has low ron, wide bandwidth, and low differential crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN applications.
This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, E\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
