TLV2254A-EP Series

Enhanced Product Advanced Lincmos(Tm) Rail-To-Rail Very Low-Power Operational Amplifiers

Catalog

Enhanced Product Advanced Lincmos(Tm) Rail-To-Rail Very Low-Power Operational Amplifiers

Part	Amplifier Type	Gain Bandwidth Product	Current - Output / Channel	Current - Supply	Number of Circuits	Grade	Mounting Type	Package / Case [x]	Package / Case [y]	Package / Case	Qualification	Slew Rate	Voltage - Input Offset	Current - Input Bias	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply Span (Min) [Min]	Voltage - Supply Span (Max) [Max]	Output Type	Package / Case [custom]	Package / Case [custom]	Supplier Device Package
Texas Instruments TLV2254AQDREP	General Purpose	200 kHz	50 mA	68 µA	4	Automotive	Surface Mount	0.154 in	3.9 mm	14-SOIC	AEC-Q100	0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	16 V	Rail-to-Rail
Texas Instruments TLV2254IDG4	General Purpose	200 kHz	50 mA	140 µA	4		Surface Mount	0.154 in	3.9 mm	14-SOIC		0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	8 V	Rail-to-Rail
Texas Instruments TLV2254AIPWRG4	General Purpose	200 kHz	50 mA	140 µA	4		Surface Mount			14-TSSOP		0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	8 V	Rail-to-Rail	0.173 "	4.4 mm	14-TSSOP
Texas Instruments TLV2254AQD	General Purpose	200 kHz	50 mA	140 µA	4	Automotive	Surface Mount	0.154 in	3.9 mm	14-SOIC	AEC-Q100	0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	8 V	Rail-to-Rail
Texas Instruments TLV2254AIPW	General Purpose	200 kHz	50 mA	140 µA	4		Surface Mount			14-TSSOP		0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	8 V	Rail-to-Rail	0.173 "	4.4 mm	14-TSSOP
Texas Instruments TLV2254AQDRQ1	General Purpose	200 kHz	50 mA	140 µA	4	Automotive	Surface Mount	0.154 in	3.9 mm	14-SOIC	AEC-Q100	0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	16 V	Rail-to-Rail
Texas Instruments TLV2254IDR	General Purpose	200 kHz	50 mA	140 µA	4		Surface Mount	0.154 in	3.9 mm	14-SOIC		0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	8 V	Rail-to-Rail
Texas Instruments TLV2254AQDRG4Q1	General Purpose	200 kHz	50 mA	140 µA	4	Automotive	Surface Mount	0.154 in	3.9 mm	14-SOIC	AEC-Q100	0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	16 V	Rail-to-Rail
Texas Instruments TLV2254AIN	General Purpose	200 kHz	50 mA	140 µA	4		Through Hole	0.3 "	7.62 mm	14-DIP		0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	8 V	Rail-to-Rail
Texas Instruments TLV2254AIPWR	General Purpose	200 kHz	50 mA	140 µA	4		Surface Mount			14-TSSOP		0.12 V/µs	200 çV	1 pA	125 °C	-40 °C	2.7 V	8 V	Rail-to-Rail	0.173 "	4.4 mm	14-TSSOP

Catalog

Enhanced Product Advanced Lincmos(Tm) Rail-To-Rail Very Low-Power Operational Amplifiers

Key Features

• Controlled BaselineOne Assembly/Test Site, One Fabrication SiteExtended Temperature Performance of –40°C to 125°CEnhanced Diminishing Manufacturing Sources (DMS) SupportEnhanced Product-Change NotificationQualification PedigreeESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 150 V (TLV2252/52A) and 100 V (TLV2254/54A) Using Machine Model (C = 200 pF, R = 0)Output Swing Includes Both Supply RailsLow Noise . . . 19 nV/Hz\ Typ at f = 1 kHzLow Input Bias Current . . . 1 pA TypFully Specified for Both Single-Supply and Split-Supply OperationVery Low Power . . . 34 µA Per Channel TypCommon-Mode Input Voltage Range Includes Negative RailLow Input Offset Voltage: 850 µV Max at TA= 25°CWide Supply Voltage Range: 2.7 V to 16 VMacromodel IncludedComponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.Advanced LinCMOS is a trademark of Texas Instruments.Controlled BaselineOne Assembly/Test Site, One Fabrication SiteExtended Temperature Performance of –40°C to 125°CEnhanced Diminishing Manufacturing Sources (DMS) SupportEnhanced Product-Change NotificationQualification PedigreeESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 150 V (TLV2252/52A) and 100 V (TLV2254/54A) Using Machine Model (C = 200 pF, R = 0)Output Swing Includes Both Supply RailsLow Noise . . . 19 nV/Hz\ Typ at f = 1 kHzLow Input Bias Current . . . 1 pA TypFully Specified for Both Single-Supply and Split-Supply OperationVery Low Power . . . 34 µA Per Channel TypCommon-Mode Input Voltage Range Includes Negative RailLow Input Offset Voltage: 850 µV Max at TA= 25°CWide Supply Voltage Range: 2.7 V to 16 VMacromodel IncludedComponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.Advanced LinCMOS is a trademark of Texas Instruments.

Description

The TLV2252 and TLV2254 are dual and quadruple low-voltage operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV225x family consumes only 34 µA of supply current per channel. This micropower operation makes them good choices for battery-powered applications. This family is fully characterized at 3 V and 5 V and is optimized for low-voltage applications. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. The TLV225x has a noise level of 19 nV/Hz at 1kHz, four times lower than competitive micropower solutions. The TLV225x, exhibiting high input impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV225xA family is available and has a maximum input offset voltage of 850 µV. The TLV2252/22544 also make great upgrades to the TLV2322/2424 in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If your design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment. The TLV2252 and TLV2254 are dual and quadruple low-voltage operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV225x family consumes only 34 µA of supply current per channel. This micropower operation makes them good choices for battery-powered applications. This family is fully characterized at 3 V and 5 V and is optimized for low-voltage applications. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. The TLV225x has a noise level of 19 nV/Hz at 1kHz, four times lower than competitive micropower solutions. The TLV225x, exhibiting high input impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV225xA family is available and has a maximum input offset voltage of 850 µV. The TLV2252/22544 also make great upgrades to the TLV2322/2424 in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If your design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.