NCV8512 Series

150 mA LDO Linear Voltage Regulator with Delay, Reset, Adjustable Reset, and Early Warning

Catalog

150 mA LDO Linear Voltage Regulator with Delay, Reset, Adjustable Reset, and Early Warning

Part	Supplier Device Package	Number of Regulators	Mounting Type	Control Features	Qualification	Grade	Current - Quiescent (Iq)	Voltage - Output (Min/Fixed)	Output Type	Current - Output	Package / Case	Package / Case [custom]	Package / Case [custom]	Output Configuration	Operating Temperature [Max]	Operating Temperature [Min]	Current - Supply (Max) [Max]	Voltage - Input (Max) [Max]
ON Semiconductor NCV8512PW50R2G	16-SOIC	1	Surface Mount	Reset	AEC-Q100	Automotive	200 µA	5 V	1.81 mOhm	150 mA	16-SOIC Exposed Pad	0.295 in	7.5 mm	Positive	125 °C	-40 °C	19 mA	45 V

Catalog

150 mA LDO Linear Voltage Regulator with Delay, Reset, Adjustable Reset, and Early Warning

Key Features

• 5.0 V +/- 2.0% Output / 150 mA Output Current

• Active RESET pull down with adjustable Reset level

• 150 mA output current capabilityPin for pin compatible with NCV8504

• Built in protections:- 60 V peak input transient- 15V reverse voltage- Shirt Circuit- Thermal Shutdown

• Early warning through FLAG/MON pins

• Thermally Enhanced in SOW-16 Exposed Pad

• AEC Qualified

• PPAP Capable

• These are Pb-Free Devices

Description

The NCV8512 is a 5.0 V precision micropower voltage regulator. The output current capability is 150 mA. The output voltage is accurate within +/- 2.0% with a maximum dropout voltage of 0.6V at 150 mA.Low quiescent current is a feature drawing only 130µA with a 100µA load. This part is ideal for any and all battery operated microprocessor equipment.Microprocessor control logic includes an active RESET (with DELAY), and a FLAG monitor which can be used to provide an early warning signal to the microprocessor of a potential impending RESET signal. The use of the FLAG monitor allow the microprocessor to finsh any signal processing before the RESET shuts the microprocessor down.The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits. The reset threshold voltage can be decreased by the connection of an external resistor divider to the RADJ lead.The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments.The device has also been optimized for EMC conditions.