LM6588 Series
Quad, 16-V, 24-MHz, high output current operational amplifier for TFT LCD applications
Manufacturer: Texas Instruments
Catalog
Quad, 16-V, 24-MHz, high output current operational amplifier for TFT LCD applications
Key Features
• (VS= 5V, TA= 25°C Typical Values Unless Specified)Input Common Mode Voltage 0.5V Beyond RailsOutput Voltage Swing (RL= 2kΩ) 50mV from RailsOutput Short Circuit Current ±200mAContinuous Output Current 75mASupply Current (Per Amp, No Load) 750μASupply Voltage Range 5V to 16VUnity Gain Stable−3dB Bandwidth (AV= +1) 24MHzSlew Rate 11V/μSecSettling Time 270nsSOIC-14 and TSSOP-14 PackageManufactured in TI’s State-of-the-art Bonded Wafer, Trench Isolated Complementary Bipolar VIP10 Technology for High Performance at Low Power LevelsAll trademarks are the property of their respective owners.(VS= 5V, TA= 25°C Typical Values Unless Specified)Input Common Mode Voltage 0.5V Beyond RailsOutput Voltage Swing (RL= 2kΩ) 50mV from RailsOutput Short Circuit Current ±200mAContinuous Output Current 75mASupply Current (Per Amp, No Load) 750μASupply Voltage Range 5V to 16VUnity Gain Stable−3dB Bandwidth (AV= +1) 24MHzSlew Rate 11V/μSecSettling Time 270nsSOIC-14 and TSSOP-14 PackageManufactured in TI’s State-of-the-art Bonded Wafer, Trench Isolated Complementary Bipolar VIP10 Technology for High Performance at Low Power LevelsAll trademarks are the property of their respective owners.
Description
AI
The LM6588 is a low power, high voltage, rail-to-rail input-output amplifier ideally suited for LCD panel VCOMdriver and gamma buffer applications. The LM6588 contains four unity gain stable amplifiers in one package. It provides a common mode input ability of 0.5V beyond the supply rails, as well as an output voltage range that extends to within 50mV of either supply rail. With these capabilities, the LM6588 provides maximum dynamic range at any supply voltage. Operating on supplies ranging from 5V to 16V, while consuming only 750μA per amplifier, the LM6588 has a bandwidth of 24MHz (−3dB).
The LM6588 also features fast slewing and settling times, along with a high continuous output capability of 75mA. This output stage is capable of delivering approximately 200mA peak currents in order to charge or discharge capacitive loads. These features are ideal for use in TFT-LCDs.
The LM6588 is available in the industry standard 14-pin SOIC package and in the space-saving 14-pin TSSOP package. The amplifiers are specified for operation over the full −40°C to +85°C temperature range.
The LM6588 is a low power, high voltage, rail-to-rail input-output amplifier ideally suited for LCD panel VCOMdriver and gamma buffer applications. The LM6588 contains four unity gain stable amplifiers in one package. It provides a common mode input ability of 0.5V beyond the supply rails, as well as an output voltage range that extends to within 50mV of either supply rail. With these capabilities, the LM6588 provides maximum dynamic range at any supply voltage. Operating on supplies ranging from 5V to 16V, while consuming only 750μA per amplifier, the LM6588 has a bandwidth of 24MHz (−3dB).
The LM6588 also features fast slewing and settling times, along with a high continuous output capability of 75mA. This output stage is capable of delivering approximately 200mA peak currents in order to charge or discharge capacitive loads. These features are ideal for use in TFT-LCDs.
The LM6588 is available in the industry standard 14-pin SOIC package and in the space-saving 14-pin TSSOP package. The amplifiers are specified for operation over the full −40°C to +85°C temperature range.
