TMUX7411F Series

±60-V fault-protected 1:1 (SPST) four-channel switches with 1.8-V logic (four active low)

Catalog

±60-V fault-protected 1:1 (SPST) four-channel switches with 1.8-V logic (four active low)

Part	Crosstalk	Operating Temperature [Min]	Operating Temperature [Max]	Package / Case	Number of Circuits	On-State Resistance (Max) [Max]	Supplier Device Package	Voltage - Supply, Single (V+) [Max]	Voltage - Supply, Single (V+) [Min]	Channel-to-Channel Matching (ΔRon)	Current - Leakage (IS(off)) (Max) [Max]	Channel Capacitance (CS(off), CD(off)) [custom]	Channel Capacitance (CS(off), CD(off)) [custom]	-3db Bandwidth	Switch Circuit	Multiplexer/Demultiplexer Circuit	Charge Injection	Mounting Type	Switch Time (Ton, Toff) (Max) [custom]	Switch Time (Ton, Toff) (Max) [custom]
Texas Instruments TMUX7411FRRPR	-110 dB	-40 °C	125 °C	16-WQFN Exposed Pad	4	11 Ohm	16-WQFN (4x4)	44 V	8 V	600 mOhm	700 pA	12 pF	14 pF	650 MHz	SPST - NO	1:1	-330 pC	Surface Mount	750 ns	210 ns

Catalog

±60-V fault-protected 1:1 (SPST) four-channel switches with 1.8-V logic (four active low)

Key Features

• Wide supply voltage range:Single supply: 8 V to 44 VDual supply: ±5 V to ±22 VIntegrated fault protection:Overvoltage protection, source to supplies or source to drain: ±85 VOvervoltage protection: ±60 VPowered-off protection: ±60 VInterrupt flags to indicate fault statusOutput open circuited during faultLatch-up immunity by device constructionHuman Body Model (HBM) ESD rating: 6-kVLow on-resistance: 8.3 Ω typicalFlat on-resistance: 10 mΩ typicalLogic capable: 1.8-VFail-safe logic: up to 44 V independent of supplyIndustry-standard TSSOP and smaller WQFN packagesWide supply voltage range:Single supply: 8 V to 44 VDual supply: ±5 V to ±22 VIntegrated fault protection:Overvoltage protection, source to supplies or source to drain: ±85 VOvervoltage protection: ±60 VPowered-off protection: ±60 VInterrupt flags to indicate fault statusOutput open circuited during faultLatch-up immunity by device constructionHuman Body Model (HBM) ESD rating: 6-kVLow on-resistance: 8.3 Ω typicalFlat on-resistance: 10 mΩ typicalLogic capable: 1.8-VFail-safe logic: up to 44 V independent of supplyIndustry-standard TSSOP and smaller WQFN packages

Description

The TMUX7411F, TMUX7412F, and TMUX7413F are complementary metal-oxide semiconductor (CMOS) analog switches in 1:1 (SPST), 4-channel configurations. The devices work well with dual supplies (±5 V to ±22 V), a single supply (8 V to 44 V), or asymmetric supplies (such as VDD= 12 V, VSS= –5 V). The overvoltage protection is available in powered and powered-off conditions, making the TMUX741xF devices suitable for applications where power supply sequencing cannot be precisely controlled. The devices block fault voltages up to +60 V or −60 V relative to ground in powered and powered-off conditions. When no power supplies are present, the switch channels remain in the OFF state regardless of the switch input conditions, and any control signal present on the logic pins is ignored. If the signal path input voltage on any Sx pin exceeds the supply voltage (VDDor VSS) by a threshold voltage (VT), the channel turns OFF and the Sx pin becomes high impedance. The drain pin (Dx) of a selected channel under a fault condition is floating. The TMUX741xF devices provide an active-low interrupt flag (FF) to indicate if any of the source inputs are experiencing a fault condition to help system diagnostics. The TMUX7411F, TMUX7412F, and TMUX7413F are complementary metal-oxide semiconductor (CMOS) analog switches in 1:1 (SPST), 4-channel configurations. The devices work well with dual supplies (±5 V to ±22 V), a single supply (8 V to 44 V), or asymmetric supplies (such as VDD= 12 V, VSS= –5 V). The overvoltage protection is available in powered and powered-off conditions, making the TMUX741xF devices suitable for applications where power supply sequencing cannot be precisely controlled. The devices block fault voltages up to +60 V or −60 V relative to ground in powered and powered-off conditions. When no power supplies are present, the switch channels remain in the OFF state regardless of the switch input conditions, and any control signal present on the logic pins is ignored. If the signal path input voltage on any Sx pin exceeds the supply voltage (VDDor VSS) by a threshold voltage (VT), the channel turns OFF and the Sx pin becomes high impedance. The drain pin (Dx) of a selected channel under a fault condition is floating. The TMUX741xF devices provide an active-low interrupt flag (FF) to indicate if any of the source inputs are experiencing a fault condition to help system diagnostics.