SN74ABT16240A Series

16-ch, 4.5-V to 5.5-V inverters with TTL-compatible CMOS inputs and 3-state outputs

Catalog

16-ch, 4.5-V to 5.5-V inverters with TTL-compatible CMOS inputs and 3-state outputs

Part	Operating Temperature [Max]	Operating Temperature [Min]	Logic Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Mounting Type	Number of Elements	Number of Bits per Element	Supplier Device Package	Current - Output High, Low [custom]	Current - Output High, Low [custom]	Package / Case	Package / Case	Package / Case [custom]	Output Type	Package / Case [y]	Package / Case [y]
Texas Instruments SN74ABT16240ADGGR	85 °C	-40 °C	Buffer Inverting	4.5 V	5.5 V	Surface Mount	4	4	48-TSSOP	64 mA	32 mA	48-TFSOP	0.24 in	6.1 mm	3-State
Texas Instruments SN74ABT16240DL
Texas Instruments SN74ABT16240DGGR
Texas Instruments SN74ABT16240ADLG4	85 °C	-40 °C	Buffer Inverting	4.5 V	5.5 V	Surface Mount	4	4	48-SSOP	64 mA	32 mA	48-BSSOP			3-State	0.295 in	7.5 mm
Texas Instruments SN74ABT16240ADLRG4	85 °C	-40 °C	Buffer Inverting	4.5 V	5.5 V	Surface Mount	4	4	48-SSOP	64 mA	32 mA	48-BSSOP			3-State	0.295 in	7.5 mm
Texas Instruments SN74ABT16240ADLR	85 °C	-40 °C	Buffer Inverting	4.5 V	5.5 V	Surface Mount	4	4	48-SSOP	64 mA	32 mA	48-BSSOP			3-State	0.295 in	7.5 mm
Texas Instruments SN74ABT16240ADL	85 °C	-40 °C	Buffer Inverting	4.5 V	5.5 V	Surface Mount	4	4	48-SSOP	64 mA	32 mA	48-BSSOP			3-State	0.295 in	7.5 mm

Catalog

16-ch, 4.5-V to 5.5-V inverters with TTL-compatible CMOS inputs and 3-state outputs

Key Features

• Members of the Texas InstrumentsWidebusTMFamilyState-of-the-ArtEPIC-IIBTMBiCMOS Design Significantly Reduces Power DissipationTypical VOLP(Output Ground Bounce) < 1 V at VCC= 5 V, TA= 25°CDistributed VCCand GND Pin Configuration Minimizes High-Speed Switching NoiseFlow-Through Architecture Optimizes PCB LayoutHigh-Drive Outputs (-32-mA IOH, 64-mA IOL)Latch-Up Performance Exceeds 500 mAPer JESD 17ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)Package Options Include Plastic Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center SpacingsWidebus and EPIC-IIB are trademarks of Texas Instruments Incorporated.Members of the Texas InstrumentsWidebusTMFamilyState-of-the-ArtEPIC-IIBTMBiCMOS Design Significantly Reduces Power DissipationTypical VOLP(Output Ground Bounce) < 1 V at VCC= 5 V, TA= 25°CDistributed VCCand GND Pin Configuration Minimizes High-Speed Switching NoiseFlow-Through Architecture Optimizes PCB LayoutHigh-Drive Outputs (-32-mA IOH, 64-mA IOL)Latch-Up Performance Exceeds 500 mAPer JESD 17ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)Package Options Include Plastic Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center SpacingsWidebus and EPIC-IIB are trademarks of Texas Instruments Incorporated.

Description

The 'ABT16240A devices are 16-bit buffers and line drivers designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. These devices provide inverting outputs and symmetrical active-low output-enable (OE\) inputs. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT16240A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16240A is characterized for operation from -40°C to 85°C. The 'ABT16240A devices are 16-bit buffers and line drivers designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. These devices provide inverting outputs and symmetrical active-low output-enable (OE\) inputs. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT16240A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16240A is characterized for operation from -40°C to 85°C.