FXL4TD245 Series

Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls

Manufacturer: ON Semiconductor

Catalog

Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls

Part	Operating Temperature [Max]	Operating Temperature [Min]	Channels per Circuit	Features	Package / Case	Number of Circuits	Translator Type	Mounting Type	Output Type	Voltage - VCCA [Max]	Voltage - VCCA [Min]	Voltage - VCCB [Max]	Voltage - VCCB [Min]	Supplier Device Package	Channel Type
ON Semiconductor FXL4TD245BQX	85 °C	-40 °C	4	Power-Off Protection	16-WFQFN Exposed Pad	1	Voltage Level	Surface Mount	Non-Inverted Tri-State	3.6 V	1.1 V	3.6 V	1.1 V	16-DQFN (2.5x3.5)	Bidirectional

Catalog

Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls

Key Features

• Bi-directional interface between any 2 levels from 1.1V to 3.6V

• Fully configurable: Inputs track VCClevel

• Non-preferential power-up sequencing; either VCCmay be powered-up first

• Outputs remain in 3-STATE until active VCClevel is reached

• Outputs switch to 3-STATE if either VCCis at GND

• Power-off protection

• Control inputs (T/R n, OE) levels are referenced to VCCAvoltage

• Packaged in 16-terminal DQFN (2.5mm x 3.5mm)and 16-terminal MicroMLP (1.8mm x 2.6mm)

• ESD Protection Exceeds:

• 4kV HBM ESD(per JESD22-A114 & Mil Std 883e 3015.7)

• 8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7)

• 1kV CDM ESD (per ESD STM 5.3)

• 200V MM ESD (per JESD22-A115 & ESD STM5.2)

Description

The FXL4TD245 is a configurable 4-bit dual-voltage supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCAlevel, and the B Port tracks the VCCBlevel. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both VCCs reach active levels allowing either VCCto be powered-up first. Internal power down control circuits place the device in 3-STATE if either VCCis removed. The Transmit/Receive (T/R) input determines the direction of data flow through the device. The OE input, when HIGH, disables both the A and B Ports by placing them in a 3-STATE condition. The FXL4TD245 is designed so that the control pins (T/R and OE) are supplied by VCCA.