CC3130 Series

SimpleLink™ Arm Cortex-M3 Wi-Fi® network processor with coexistence, WPA3, 16 TLS sockets

Catalog

SimpleLink™ Arm Cortex-M3 Wi-Fi® network processor with coexistence, WPA3, 16 TLS sockets

Part	Data Rate (Max)	Frequency [Min]	Frequency [Max]	Mounting Type	GPIO	Supplier Device Package	Modulation	Serial Interfaces	Power - Output	Operating Temperature [Max]	Operating Temperature [Min]	Type	Current - Receiving	RF Family/Standard	Voltage - Supply [Min]	Voltage - Supply [Max]	Protocol	Current - Transmitting [Max]	Current - Transmitting [Min]	Package / Case
Texas Instruments CC3130RNMRGKR	72 Mbps	2.412 GHz	2.472 GHz	Surface Mount	32	64-VQFN (9x9)	CCK DSSS OFDM	SPI UART	18 dBm	85 °C	-40 °C	TxRx + MCU	53 mA	WiFi	2.1 V	3.6 V	802.11b/g/n	272 mA	160 mA	64-VFQFN Exposed Pad

Catalog

SimpleLink™ Arm Cortex-M3 Wi-Fi® network processor with coexistence, WPA3, 16 TLS sockets

Key Features

• Integrated Wi-Fi and internet protocolsCoexistence with BLE radios (CC13x2/CC26x2)Rich set of IoT security features helps developers protect dataLow-power modes for battery powered applicationNetwork-assisted roamingIndustrial temperature: –40°C to +85°CTransferable Wi-Fi Alliance certificationWi-Fi network processor subsystem:Wi-Fi core:802.11b/g/n 2.4GHzModes:Access point (AP)Station (STA)Wi-Fi DirectSecurity:WEPWPA™/ WPA2™ PSKWPA2 EnterpriseWPA3™ PersonalWPA3™ EnterpriseInternet and application protocols:HTTPs server, mDNS, DNS-SD, DHCPIPv4 and IPv6 TCP/IP stack16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)Built-in power management subsystem:Configurable low-power profiles (always, intermittent, tag)Advanced low-power modesIntegrated DC/DC regulatorsMultilayered security features:Separate execution environmentsNetworking securityDevice identity and keyHardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)File-system security (encryption, authentication, access control)Initial secure programmingSoftware tamper detectionCertificate signing request (CSR)Unique per device key pairApplication throughput:UDP: 16Mbps, TCP: 13MbpsPeak: 72MbpsPower-management subsystem:Integrated DC/DC converters support a wide range of supply voltage:VBAT wide-voltage mode: 2.1V to 3.6VVIO is always tied with VBATAdvanced low-power modes:Shutdown: 1µA, hibernate: 4µALow-power deep sleep (LPDS): 120µAIdle connected (MCU in LPDS): 710µARX traffic (MCU active): 53mATX traffic (MCU active): 223mAWi-Fi TX power:18.0dBm at 1 DSSS14.5dBm at 54 OFDMWi-Fi RX sensitivity:–96dBm at 1 DSSS–74.5dBm at 54 OFDMClock source:40.0MHz crystal with internal oscillator32.768kHz crystal or external RTCRGK package64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitchDevice supportsSimpleLink™ MCU Platformdeveloper’s ecosystemIntegrated Wi-Fi and internet protocolsCoexistence with BLE radios (CC13x2/CC26x2)Rich set of IoT security features helps developers protect dataLow-power modes for battery powered applicationNetwork-assisted roamingIndustrial temperature: –40°C to +85°CTransferable Wi-Fi Alliance certificationWi-Fi network processor subsystem:Wi-Fi core:802.11b/g/n 2.4GHzModes:Access point (AP)Station (STA)Wi-Fi DirectSecurity:WEPWPA™/ WPA2™ PSKWPA2 EnterpriseWPA3™ PersonalWPA3™ EnterpriseInternet and application protocols:HTTPs server, mDNS, DNS-SD, DHCPIPv4 and IPv6 TCP/IP stack16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)Built-in power management subsystem:Configurable low-power profiles (always, intermittent, tag)Advanced low-power modesIntegrated DC/DC regulatorsMultilayered security features:Separate execution environmentsNetworking securityDevice identity and keyHardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)File-system security (encryption, authentication, access control)Initial secure programmingSoftware tamper detectionCertificate signing request (CSR)Unique per device key pairApplication throughput:UDP: 16Mbps, TCP: 13MbpsPeak: 72MbpsPower-management subsystem:Integrated DC/DC converters support a wide range of supply voltage:VBAT wide-voltage mode: 2.1V to 3.6VVIO is always tied with VBATAdvanced low-power modes:Shutdown: 1µA, hibernate: 4µALow-power deep sleep (LPDS): 120µAIdle connected (MCU in LPDS): 710µARX traffic (MCU active): 53mATX traffic (MCU active): 223mAWi-Fi TX power:18.0dBm at 1 DSSS14.5dBm at 54 OFDMWi-Fi RX sensitivity:–96dBm at 1 DSSS–74.5dBm at 54 OFDMClock source:40.0MHz crystal with internal oscillator32.768kHz crystal or external RTCRGK package64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitchDevice supportsSimpleLink™ MCU Platformdeveloper’s ecosystem

Description

Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3130 device from Texas Instruments. The SimpleLink™ Wi-Fi CC3130 Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, in order to offload networking activities from the host MCU. The subsystem includes an 802.11b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built in power management for best in class low power performance. The Wi-Fi CERTIFIED® CC3130 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature. This generation introduces new capabilities that further simplify the connectivity of things to the internet. The main new features include: The CC3130 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency). The CC3130 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs, and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1GHz, and host MCUs. For more information, visitwww.ti.com/simplelink. Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3130 device from Texas Instruments. The SimpleLink™ Wi-Fi CC3130 Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, in order to offload networking activities from the host MCU. The subsystem includes an 802.11b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built in power management for best in class low power performance. The Wi-Fi CERTIFIED® CC3130 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature. This generation introduces new capabilities that further simplify the connectivity of things to the internet. The main new features include: The CC3130 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency). The CC3130 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs, and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1GHz, and host MCUs. For more information, visitwww.ti.com/simplelink.