MC26LS30 Series

Dual Differential (EIA-422-A)/Quad Single Ended (EIA-423-A) Line Driver

Catalog

Dual Differential (EIA-422-A)/Quad Single Ended (EIA-423-A) Line Driver

Part	Package / Case	Package / Case [x]	Package / Case [y]	Type	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Voltage - Supply [Min]	Voltage - Supply [Max]	Supplier Device Package	Mounting Type	Protocol	Operating Temperature [Max]	Operating Temperature [Min]
ON Semiconductor MC26LS30DR2	16-SOIC	0.154 in	3.9 mm	Driver	4	0	4.75 V	5.25 V	16-SOIC	Surface Mount	RS422 RS423
ON Semiconductor MC26LS30DR2G	16-SOIC	0.154 in	3.9 mm	Driver	4	0	4.75 V	5.25 V	16-SOIC	Surface Mount	RS422 RS423	85 °C	-40 °C

Catalog

Dual Differential (EIA-422-A)/Quad Single Ended (EIA-423-A) Line Driver

Key Features

• Operates as Two Differential EIA-422-A Drivers, or Four Single-Ended EIA-423-A Drivers

• High Impedance Outputs in Differential Mode

• Short Circuit Current Limit In Both Source and Sink Modes

• +/-10 V Common Mode Range on High Impedance Outputs

• +/-15 V Range on Inputs

• Low Current PNP Inputs Compatible with TTL, CMOS, and MOS Outputs

• Individual Output Slew Rate Control in Single-Ended Mode

• Replacement for the AMD AM26LS30 and National Semiconductor DS3691

Description

The MC26LS30 is a low power Schottky set of line drivers which can be configured as two differential drivers which comply with EIA-422-A standards, or as four single-ended drivers which comply with EIA-423-A standards. A mode select pin and appropriate choice of power supplies determine the mode. Each driver can source and sink currents in excess of 50 mA.In the differential mode (EIA-422-A), the drivers can be used up to 10 Mbaud. A disable pin for each driver permits setting the outputs into a high impedance mode within a +10 V common mode range. In the single-ended mode (EIA-423-A), each driver has a slew rate control pin which permits setting the slew rate of the output signal so as to comply with EIA-423-A and FCC requirements and to reduce crosstalk. When operated from symmetrical supplies (+5.0 V), the outputs exhibit zero imbalance.The MC26LS30 is available in a 16-pin surface mount package. Operating temperature range is -40° to +85°C.